User Manual

1-27
2. Press !m(SET UP) to display the mode’s Setup
screen.
• This Setup screen is just one possible example. Actual
Setup screen contents will differ according to the mode
you are in and that mode’s current settings.
3. Use the f and c cursor keys to move the highlighting to the item whose setting you
want to change.
4. Press the function key ( 1 to 6) that is marked with the setting you want to make.
5. After you are finished making any changes you want, press J to exit the Setup screen.
k Setup Screen Function Key Menus
This section details the settings you can make using the function keys in the Setup screen.
indicates default setting.
Item names below that are marked with an asterisk (*) are not included on the fx-7400G
II .
u Mode (calculation/binary, octal, decimal, hexadecimal mode)
• { Comp } ... {arithmetic calculation mode}
• { Dec } / { Hex } / { Bin } / { Oct } ... {decimal}/{hexadecimal}/{binary}/{octal}
u Frac Result (fraction result display format)
• { d/c } / { ab/c } ... {improper}/{mixed} fraction
u Func Type (graph function type)
Pressing one of the following function keys also switches the function of the v key.
• { Y= } / { r= } / { Parm } / { X= } ... {rectangular coordinate (Y=
f ( x ) type)}/{polar coordinate}/
{parametric}/{rectangular coordinate (X=
f ( y ) type)} graph
• { Y> } / { Y< } / { Y t} / { Y s} ... {
y > f ( x )}/{ y < f ( x )}/{ y ≥ f ( x )}/{ y ≤ f ( x )} inequality graph
• { X> } / { X< } / { X t} / { X s} ... {
x > f ( y )}/{ x < f ( y )}/{ x ≥ f ( y )}/{ x ≤ f ( y )} inequality graph
u Draw Type (graph drawing method)
• { Con } / { Plot } ... {connected points}/{unconnected points}
u Derivative (derivative value display)
• { On } / { Off } ... {display on}/{display off} while Graph-to-Table, Table & Graph, and Trace are
being used
u Angle (default angle unit)
• { Deg } / { Rad } / { Gra } ... {degrees}/{radians}/{grads}