User Manual

1-26
7. Program (PRGM) Menu
To display the program (PRGM) menu, first enter the RUN • MAT (or RUN) or PRGM mode
from the Main Menu and then press !J(PRGM). The following are the selections
available in the program (PRGM) menu.
• The program (PRGM) menu items are not displayed when “Math” is selected for the “Input/
Output” mode setting on the Setup screen.
• {COM} ...... {program command menu}
• { CTL } ....... {program control command menu}
• { JUMP } ..... {jump command menu}
• { ? } ............ {input command}
• { ^} .......... {output command}
• { CLR } ....... {clear command menu}
• { DISP } ...... {display command menu}
• { REL } ....... {conditional jump relational operator menu}
• { I/O } ......... {I/O control/transfer command menu}
• { : } ............. {multi-statement command}
• { STR } ....... {string command}
The following function key menu appears if you press !J(PRGM) in the RUN • MAT (or
RUN ) mode or the PRGM mode while binary, octal, decimal, or hexadecimal is set as the
default number system.
• { Prog } ....... {program recall}
• { JUMP } / { ? } / { ^} / { REL } / {:}
The functions assigned to the function keys are the same as those in the Comp mode.
For details on the commands that are available in the various menus you can access from the
program menu, see “Chapter 8 Programming”.
8. Using the Setup Screen
The mode’s Setup screen shows the current status of mode settings and lets you make any
changes you want. The following procedure shows how to change a setup.
u To change a mode setup
1. Select the icon you want and press w to enter a mode and display its initial screen. Here
we will enter the RUN • MAT (or RUN ) mode.