User Manual

α-2
Message Meaning Countermeasure
Argument
ERROR
• Incorrect argument specification for a
command that requires an argument.
• Correct the argument.
Dimension
ERROR
• Illegal dimension used during
matrix, vector, or list calculations.
• Check the matrix, vector, or list
dimension.
Range ERROR
1 Input of an improper V-Window
value.
2 V-Window range settings exceeded
when a graph is redrawn.
3 Input of an improper value on the
range screen and use of that value
for execution.
4 The spreadsheet cell range was
exceeded by paste, recall, or other
cell operation.
1 Change the V-Window value so it
is within range.
2 Redraw using the proper settings.
3 Input a proper range value.
4 Repeat the procedure taking
care that the cell range is not
exceeded.
Condition
ERROR
• Execution of a calculation or
function before all conditions
required for execution are met.
• Check the conditions and make
any necessary corrections.
Non-Real
ERROR
• Calculation that produces a complex
number when Real is specified for
the Complex Mode setting on the
Setup screen, even though the
argument is a real number.
• Change the Complex Mode
setting to something other than
Real.
Complex
Number In List
• List containing complex number used
in a calculation or operation for which
complex number data is invalid.
• Change all data in the list to real
numbers.
Complex
Number In
Matrix
• Matrix containing complex number
used in a calculation or operation
for which complex number data is
invalid.
• Change all data in the matrix to
real numbers.
Complex
Number In
Matrix or
Vector
• Matrix or vector containing complex
number used in a calculation or
operation for which complex number
data is invalid.
• Change all data in the matrix or
vector to real numbers.
Complex
Number In
Data
• Data sent from a function of this
calculator (matrix, etc.) includes
complex number data, but the
corresponding function of the
receiving calculator does not support
data that includes complex numbers.
Example: Attempting to send a
matrix containing a complex number
in an element to CFX-9850G.
• Send data that does not include
complex numbers.
Can’t Simplify • Fraction simplification was attempted
using the 'Simp function (page
2-21), but simplification could not be
performed using the specified divisor.
Example: Specifying a divisor of 3 to
simplify the fraction 4/8.
• Specify a different divisor or
execute 'Simp without specifying
any divisor.