User Manual
13-5
1. On the receiver’s data communication main menu, press
5(WAKE).
This displays the Wakeup setting screen.
• { On } ... {turns Wakeup on}
• { Off } ... {turns Wakeup off}
2. Press 1(On).
This turns on Wakeup and returns of the data communication main menu.
3. Turn off the receiver.
4. Connect the receiver to the sender.
5. Starting a send operation on the sender causes the receiver to turn on automatically and
performs the data transfer operation.
4. Data Communications Precautions
The following are the types of data items that can be sent.
Data Item Contents Overwrite Check*
6
ALPHA MEM Alpha memory contents No
<CAPTURE> Capture memory group
CAPT
n
Capture memory (1 to 20) data No
CONICS*
1
Conics setting data No
DYNA MEM*
1
Dynamic Graph functions Yes
EQUATION Equation calculation coefficient values No
<E-CON2>*
1
E-CON2 or E-CON3 memory group
CP
n*
1
Custom probe memory (1 to 99) contents Yes
SU
n*
1
E-CON setup memory (1 to 99) contents Yes
SDn*
1
E-CON measurement memory (CH1, CH2, CH3,
CHSNC, CHMIC, CHFFT) contents
Yes
Econ2Now*
2
E-CON2 current setup memory contents Yes
Econ3Now*
3
E-CON3 current setup memory contents Yes
FINANCIAL*
1
Financial data No
<F-MEM> Function memory group
F-MEM
n
Function memory (1 to 20) contents No
<G-MEM> Graph memory group
G-MEM
n
Graph memory (1 to 20) contents Yes
<LISTFILE> List file group
LIST
n
List memory (1 to 26, and Ans) contents Yes
LIST FILE
n
List file memory (1 to 6) contents Yes
<MAT_VCT>*
5
Matrix/Vector group
<MATRIX>*
4
Matrix group*
4
MAT n*
1
Matrix memory (A to Z, and Ans) contents Yes
VCT
n*
5
Vector memory (A to Z, and Ans) contents Yes
<PICTURE> Picture memory group
PICT
n
Picture (graph) memory (1 to 20) data No