User's Guide

Fix Sci Norm
Specifies the number of digits for display of a calculation result.
Fix: The value you specify (from 0 to 9) controls the number of decimal
places for displayed calculation results. Calculation results are rounded of
f
to the specified digit before being displayed.
Example: 100 ÷ 7 = 14.286 (Fix 3)
14.29 (Fix 2)
Sci: The value you specify (from 1 to 10) controls the number of significant
digits for displayed calculation results. Calculation results are rounded off
to the specified digit before being displayed.
Example: 1 ÷ 7 = 1.4286 × 10
-1
(Sci 5)
1.428571429 × 10
-1
(Sci 0)
Norm: Selecting one of the two available settings (
Norm 1, Norm 2)
determines the range in which results will be displayed in exponential
format. Outside the specified range, results are displayed using non-
exponential format.
Norm 1: 10
-2
> | x |, | x | ≧ 10
10
Norm 2: 10
-9
> | x |, | x | ≧ 10
10
Example: 1 ÷ 200 = 5 × 10
-3
(Norm 1)
0.005 (Norm 2)
a+bi r∠ θ (EQN Mode only)
Specifies either rectangular coordinates ( a +bi) or polar coordinates ( r ∠
θ ) for EQN Mode solutions. The "r∠ θ " indicator is displayed while polar
coordinates ( r ∠ θ ) are selected.
ab/c d/c
Specifies either mixed fraction (ab/c) or improper fraction (d/c) for display
of fractions in calculation results.
9