User's Guide

(x=3.5 → yˆ=?)
3.5 (Regression)
(yˆ)
Creating a Number Table
The Table Mode generates a number table based on one or two functions.
You can use the function
f(x) or the two functions f(x) and g(x).
Configuring a Number Table Generation Function
Perform the following steps to generate a number table.
1. Press
, select the Table Mode icon, and then press .
• This displays the function input screen.
2. Use the
x
variable to input two functions, one in the format
f
(
x
) and the
other in the format
g(x).
• Be sure to input the x variable ( (x)) when generating a number
table. Any variable other than
x is handled as a constant.
• If you are using a single function, input a function in the format f(x)
only.
3. On the Table Range dialog box that appears, input values for Start, End,
and Step.
For this: Input this:
Start
Input the lower limit of x (Default = 1).
End
Input the upper limit of x (Default = 5).
92