User Manual

β-2
3. Press 1(Yes).
• Read the message on the dialog box that appears.
4. Press 2.
• This displays the dialog box shown below.
5. Press J.
fx-9750GIII Operation
Note: Entering the Examination Mode for IB by selecting Math for the Input/Output setting of
the Setup menu will cause the Input/Output setting to switch to Mth/Mix. Note that Math cannot
be selected for the Input/Output setting while in the Examination Mode for IB.
1. Press !o(OFF) to turn off the calculator.
2.
Depending on the Examination Mode you want to enter, perform either of the operations
below.
Examination Mode for IB:
While holding down the c(E) and h(M) keys, press the
o key. This displays the “Enter Examination Mode for
IB?” dialog box.
Examination Mode for Texas (US):
While holding down the /(T) and +(X) keys, press the
o key. This displays the “Enter Examination Mode for
Texas (US)?” dialog box.
3. Press 1(Yes).
4. Next, after reading the message on the dialog box that appears, press 2.
• Performing the operation to enter Examination Mode for
Texas (US) causes an ATTENTION dialog box to
appear. If you are in an IB exam, press 6(No) to exit
Examination Mode for Texas (US). If you want to
continue using Examination Mode for Texas (US), press
1(Yes).
5. Press J.