User Manual

11-6
• If you select one or more individual items inside of a data group or folder, the black selection
pointer (  ) appears next to each item, while a white selection pointer ( g) appears next to the
group or folder name.
• Returning to the MEMORY mode initial screen deselects all currently selected items.
k Copying Data
Important!
• Data copy is not supported on the fx-7400GIII.
u To copy from main memory to storage memory
Note
• The following procedure saves the selected data into a single file. You assign a name to the
file, which is stored in storage memory.
1. On the main memory data information screen, select the data you want to copy.
2. Press 2(COPY).
• This displays the folder selection screen.
3. Specify the folder you want.
• Highlight ROOT to copy the data to the root directory.
• To copy the data to a specific folder, use f and c to move the highlighting to the
desired folder and then press 1(OPEN).
4. Press 1(SV
• AS).
• This displays the file name input screen.
5. Input the file name you want to give to the file.
• To cancel the copy operation, press J.
6. Press w to copy the data.
• The message “Complete!” appears when the copy operation is complete.
• The file name input screen does not appear when you copy data from storage memory to
main memory.
J
→