User Manual

1-17
Function Key Operation
Original
Expression
Expression After
Insertion
'
!x(')
Cube Root
!((
3
')
Power Root
!M(
x
')
e
x
!I(e
x
)
10
x
!l(10
x
)
log(a,b)
4(MATH)2(log
a
b)
Absolute Value
4(MATH)3(Abs)
Linear Differential
4(MATH)4(
d/dx)
Quadratic Differential
4(MATH)5(
d
2
/dx
2
)
Integral
4(MATH)6(g)
1(∫
dx)
Σ Calculation
4(MATH)6(g)
2(Σ( )
• In the Linear input/output mode, pressing !D(INS) will change to the insert mode. See
page 1-6 for more information.
u Editing Calculations in the Math Input/Output Mode
The procedures for editing calculations in the Math input/output mode are basically the same
as those for the Linear input/output mode. For more information, see “Editing Calculations”
(page 1-6).
Note however, that the following points are different between the Math input/output mode and
the Linear input/output mode.
• Overwrite mode input that is available in the Linear input/output mode is not supported by
the Math input/output mode. In the Math input/output mode, input is always inserted at the
current cursor location.
• In the Math input/output mode, pressing the D key always performs a backspace operation.
• Note the following cursor operations you can use while inputting a calculation with Math
input/output mode.
To do this: Press this key:
Move the cursor from the end of the calculation to the beginning
e
Move the cursor from the beginning of the calculation to the end
d