User Guide
© 2022 CASIO COMPUTER CO., LTD.
MA2201-A
User’s Guide
Watch
5695
EN
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed,
carefully read and follow the instructions in this manual, especially the information under
“Operating Precautions” and “User Maintenance”.
• Your watch may differ somewhat from the one shown in the illustration.
30
Crown
Click 2
Click 1
24 Hour Hand
Minute Hand
Second Hand
Stopwatch Second Hand
Hour Hand
Stopwatch Minute Hand
Day Indicator
Stopwatch functions
To change the day indicator setting
To adjust the time setting
Pull the Crown out to Click 1.
Push the Crown back in.
Rotate the Crown to change the
time setting.
When the second hand is at
12 o’clock, pull the
Crown out to
Click 2.
Rotate the Crown towards you to
set the day.
Note
• The day indicator setting uses a
31-day month. Make adjustments for
months of shorter lengths.
• Avoid changing the day indicator
setting between the hours of 9
p.m. and 1 a.m. Otherwise, the day
indicator may not change correctly
at midnight.
Crown Operations
Some water-resistant models (10BAR, 20BAR) have a screw-in
crown. When you need to perform a crown operation, rotate
it towards you to unscrew it. Then pull the crown out. Avoid
applying undue force when pulling. The watch loses its water
resistance while the crown is unscrewed. After performing a
crown operation, fully screw the crown back in.
Crown
Loosen
If your watch has a rotary bezel...
You can rotate the bezel to align its
▼
mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the
▼
mark.
Start
Elapsed time
Current
Push the Crown back in on a time
signal to resume timekeeping.
Note
• Take care that you set the correct AM
or PM time.
• When changing the time, move the
minute hand four or five minutes past
your final setting, and then back it up
to the setting you want.