Owner's Manual

E-103
k Rectangular-Polar Coordinate
Conversion
Rectangular Polar Coordinates
Coordinates (Rec) (Pol)
Converting to Polar Coordinates (Pol)
Pol(X, Y) X: Specifies the rectangular coordinate X value
Y: Specifies the rectangular coordinate Y value
• Calculation result
θ is displayed in the range of –180° < θ
< 180°.
• Calculation result
θ is displayed using the calculator’s
default angle unit.
• Calculation result
r is assigned to variable X, while θ is
assigned to Y.
Converting to Rectangular Coordinates (Rec)
Rec(
r, θ ) r : Specifies r value of polar coordinate
θ : Specifies θ value of polar coordinate
• Input value
θ is treated as an angle value, in accordance
with the calculator’s default angle unit setting.
• Calculation result
x is assigned to variable X, while y is
assigned to Y.
• If you perform coordinate conversion inside of an
expression instead of a stand-alone operation, the
calculation is performed using only the first value (either
the
r-value or the X-value) produced by the conversion.
Example: Pol ('2, '2) + 5 = 2 + 5 = 7