User Manual

E-7
2. Connecting the Calculator to Your Computer
k To connect the calculator to your computer with the USB cable
Important!
• Be sure to install the FA-124 before you connect the calculator to your computer. Connecting
before you install the FA-124 can result in improper operation.
1 . Connect the USB cable that comes with the calculator or with the FA-124 USB to your
computer.
2 . Connect the USB cable to your calculator.
• This will automatically cause your calculator to turn on and enter data communication standby.
• If your calculator does not enter communication standby at this time, perform the steps under
“Transferring Data from the Calculator to a Computer” on page E-25.
k To connect the calculator to your computer with the SB-88 cable
Note
• Use the SB-88 cable that comes with the FA-123 USB or FA-124 USB.
• Data transfer using the SB-88 cable is not supported with Windows 7 or later (64-bit).
1 . Connect the SB-88 cable to your computer.
2 . Connect the SB-88 cable to the calculator.
What you should do next depends on the operating system running on your computer.