User Manual

E-25
3. Data Transfer between a Computer and fx-9860G Series/fx-9750GII/fx-7400GII
Transferring Data from the Calculator to a Computer
k To configure the calculator for data transfer with the USB cable
1 . Connect the USB cable.
• This displays a pop-up window.
2 . Press 1(Data Transfer).
• If the connection is broken for some reason, press 2(RECV) to display the “Receiving...”
screen.
k To configure the calculator for data transfer with the SB-88 cable
1 . Connect the SB-88 cable.
2 . From the main menu, enter the LINK mode and then press 2(RECV).
• This will display the “Receiving...” screen.
Using FA-124
The following procedures explain how to perform various data transfer and other operations using
FA-124.
k To establish a connection between your calculator and FA-124
1 . After setting up your calculator for data communication (page E-12), start up the FA-124.
• This displays the Calculator window on the left, and the FA-124 window on the right.
2 . Click the (Connect) button on the Calculator window toolbar. (PC)