3.0
Table Of Contents
- Read this first!
- Contents
- What you can do with EXILIM Remote
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Remote Capture)
- Sending the Image Displayed on the Camera Monitor Screen to a Smartphone (Quick Send)
- Sending a Just-recorded Snapshot to a Smartphone (Send Last Shot/Quick Send)
- Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image)
- Sending All Images Shot on the Current Day to a Smartphone (Send New Images)
- Trouble shooting
- Copyrights
7
The first time you establish a wireless LAN connection between a smartphone and
your camera, you will need to configure your phone’s wireless LAN settings, and input
the camera’s SSID and password. For information about how to do this, refer to your
camera’s user documentation. Once you configure wireless LAN settings, you will not
need to configure them again.
• What you need to do to establish a wireless LAN connection depends on the type
of smartphone you are using. For details about how to establish a wireless LAN
connection see the user documentation that comes with your smartphone.
. What to do if you are unable to establish a wireless LAN connection
between the camera and a smartphone.
This problem may be caused when the smartphone is already wirelessly connected to
one of the networks or devices below. Go to your smartphone’s Wi-Fi settings and
select your camera’s SSID.
• Household wireless LAN
• Public wireless LAN
• Portable wireless LAN device
Establishing a Wireless Connection for the First Time