User Manual

The first time you establish a wireless connection between the camera and a

smartphone, you need to use the procedure below to configure wireless connection

settings.

There are two types of wireless connection: Bluetooth

wireless technology

connection and wireless LAN connection.

. Using a Smartphone that Supports Bluetooth Smart (Pairing)

Wireless connection settings can be configured by simply establishing a Bluetooth

wireless technology connection (pairing) between the camera and smartphone.

• The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter a wireless mode and then select “Pairing”.

2. On the smartphone, start up the EXILIM Connect

app.

• If this is the first time you are starting up EXILIM

Connect, a Software End User License Agreement

will appear. Tap “Agree”. This will display a screen

that explains app functions. On the screen, tap

“Next” to continue to the text screen. Tapping “Done”

at the end will display the top screen (page 7).

3. On the smartphone, tap “Pairing”.

4. On the smartphone, tap the camera’s name you want to pair with.

This completes pairing of the camera and smartphone, and establishes a

Bluetooth wireless technology connection.

• In the case of an Android terminal, wireless LAN connection settings are also

configured automatically. In this case, advance to step 8 of this procedure. If

the screen shown in step 8 is not displayed, use the smartphone’s Wi-Fi

settings to select the SSID displayed on the camera and establish a wireless

LAN connection between the camera and smartphone.

• In the case of an iPhone (iOS), you need to configure wireless LAN settings

(install a profile) next. Advance to step 5 of this procedure.

5. On the smartphone, tap “Install”.

Follow the instructions that appear on the smartphone to install the profile

required for wireless LAN setup.

• On some smartphone models, the passcode input screen may appear. If this

happens, input your smartphone’s passcode.

6. After installation of the profile is complete, tap “Done” on the

smartphone.

Establishing a Wireless Connection for the First Time

Pairing