User Manual

22
EXILIM Connect supports the Remote Capture operations listed below. This manual
explains EXILIM Connect operations based on screens that appear using the iPhone
(iOS) version. Some operations may differ depending on your smartphone and
camera type.
* Depending on the camera model, this function may not be displayed or you may
not be able to change its setting.
Controlling Your Camera with a Smartphone

Exits Remote Capture.

Select this item to configure image recording
settings. The settings you can configure depend
on the camera’s recording mode. Turning on “Auto
copy after shooting” causes images you shoot
with the camera to be copied automatically to the
connected smartphone.

Tap to change the recording mode.*

Tap to view images stored in camera memory
(page 13).

Displays current flash or LED light settings.
Tap to change flash or LED light settings*.

Displays what is being picked up by the camera’s
lens.

Tap to display a full-screen view of the shooting range. To return to the standard
view, tap “ ”.

Performs a zoom operation.

Starts Prerecord CS shooting*.
This button is displayed when the camera is in the Program Auto High Speed CS
Mode and the “Pre-record CS Shots” setting is anything other than 0 or the “Pre-
record CS” setting is on.

Toggles between snapshot and movie shooting.

Shoot a snapshot or start movie recording.

Receives the snapshot that was just recorded with the camera. This option is not
displayed while the “Auto copy after shooting” setting

is turned on, because
recorded images are automatically sent to the smartphone.

Shows whether or not location information is being included. A “GPS” icon is
displayed while information is being embedded.

Displays current self-timer settings.
Tap to change self-timer settings*.
3
2
6
7
8
bl
1
bm
bn
5
4
bk
bo
9