User Manual

20
Perform the procedure below to start Remote Capture.
• The camera operations you need to perform depend on the camera model. For full
details, see the user documentation that comes with your camera.
1. On the camera, enter the wireless mode.
• If your camera has a [W ] (Wireless) button:
Press [W] (Wireless).
• If your camera does not have a [W] (Wireless) button:
Press [MENU], select the “REC MENU” tab or “PLAY MENU” tab, select
“Wireless Mode”, and then press [SET].
• If your camera supports touch panel operation:
Touch the Show Icons icon and then the wireless mode icon.
2. On the camera, select “Shoot with phone”, and then “Remote Start” or
“Start”.
• If there is a wireless LAN connection between the smartphone and camera,
advance to step 4 of this procedure.
3. For the smartphone’s Wi-Fi settings, select the SSID displayed on the
camera and establish a wireless LAN connection between the camera
and smartphone.
4. On the smartphone, start up the EXILIM Connect app.
5. Compose the image on the smartphone’s screen as you shoot.
• About 60 seconds after Remote Capture starts, the camera’s monitor screen
will go blank. Even though the monitor screen is blank, you will be able to shoot
images as long as the camera’s back lamp or operation lamp is lit green.
• With an EX-FR Series camera, the controller monitor screen will go blank and
the controller’s operation lamp will flash green about 60 seconds after Remote
Capture starts. Even though the controller monitor screen is blank, you can
shoot images as long as the camera’s wireless LAN connection lamp is lit blue.
• After you are finished with Remote Capture, return to the app’s top screen.
• You can view an image stored in camera memory by tapping .
NOTE
• While there is a wireless LAN connection between an EX-FR Series camera or
some EX-TR Series cameras and a smartphone, and the wireless mode screen is
displayed on the camera, EXILIM Connect can be used to start a Remote Capture
operation.
Cannot Connect with Bluetooth Wireless Technology