User Manual

19
Or display the wireless mode screen.

Touch the Show Icons icon.

Touch the wireless mode icon.
2. On the smartphone, start up the EXILIM Connect app.
• Check to make sure that the connection icon ( ) on the top screen is pink.
3. On the smartphone, tap “Remote Capture”.
After a short while, the camera will start up in its wireless mode, ready to record
images under remote control of the smartphone.
4. Compose the image on the smartphone’s screen as you shoot.
• About 60 seconds after Remote Capture starts, the camera’s monitor screen
will go blank. Even though the monitor screen is blank, you can shoot images
as long as the camera’s back lamp or operation lamp is lit green.
• With an EX-FR Series camera, you can shoot images as long as the camera’s
wireless LAN connection lamp is lit blue.
• After you are finished with Remote Capture, return to the app’s top screen.
• You can view an image stored in camera memory by tapping .