User Manual

. Cannot Connect with Bluetooth Wireless Technology

• The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode.

• If your camera has a [W ] (Wireless) button:

Press [W] (Wireless).

• If your camera does not have a [W] (Wireless) button:

Press [MENU], select the “REC MENU” tab or “PLAY MENU” tab, select

“Wireless Mode”, and then press [SET].

• If your camera supports touch panel operation:

Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select “Send to phone”, and then “View on phone”.

3. For the smartphone’s Wi-Fi settings, select the SSID displayed on the

camera and establish a wireless LAN connection between the camera

and smartphone.

4. On the smartphone, start up the EXILIM Connect app.

After a short while, the camera will start up in its wireless mode and display a

menu of images in camera memory.

• Tapping “ ” will start Remote Capture. If your camera has a telescoping lens

starting a Remote Capture operation will cause the lens to extend. Make sure

there is nothing near the camera that might interfere with lens movement.

NOTE

• While there is a wireless LAN connection between an EX-FR Series camera or

some EX-TR Series cameras and a smartphone, and the wireless mode screen is

displayed on the camera, EXILIM Connect can be used to view images in camera

memory.