User Manual

12
• Images shot while the camera’s Auto Send setting is “On” will be sent to the
smartphone, even if the app’s Auto Send setting is changed to “Off” before the
images are sent.
• Depending on the connected camera, turning off the camera while there are unsent
images in memory will cause an alert message to appear. If you want the images to
be sent, leave the camera on until the send operation is complete. Pressing the
camera’s [ON/OFF] (Power) again will turn off the camera.
• Depending on the connected camera, disconnection of the camera and
smartphone while there are unsent images will cause an alert message to appear,
and then the camera will automatically turn off after about one minute. In this case,
the camera will try to send the images again after it is turned back on.