User manual - EXZR500_ZR510_M29_FB_140303

Quick Start Basics

Use the following procedure to view snapshots on the camera’s monitor screen.

• For information about how to play back movies, see page 111.

• For information about images recorded using continuous shutter (CS), see page

113.

1. Turn on the camera and press

[p] (PLAY) to enter the PLAY

mode.

• This will display one of the snapshots

currently stored in memory.

• Information about the displayed

snapshot also is included (page 11).

• You also can clear the information to

view only the snapshot (page 12).

• You can zoom in on the image by rotating the zoom controller towards z

(page 117). If you are recording a snapshot that is very important to you, it is

recommended that you zoom the image and check its details after recording it.

2. Use [4] and [6] to scroll between images.

• Holding down either button scrolls at high speed.

NOTE

• Half-pressing the shutter button while in the PLAY mode or while a menu screen is

displayed will switch directly to the REC mode.

Viewing Snapshots

[p] (PLAY)

[6]

[4]