User Manual

171
Connecting the Camera with a Smartphone
(Wireless Connection)
• Up to 10,000 location records can be maintained by the smartphone. If there are
already 10,000 records, shooting a new snapshot will cause the oldest location
record to be deleted to make room for the new one.
• Enabling location-based services causes the location information, and other
personally identifiable information to be included in the snapshot data. Take care
when sharing or publishing such images on web services, etc.
• This camera is not designed to be used for navigation, surveying, or other activities
that require precision instruments.
Use procedure to change the password you used when establishing a wireless LAN
connection between the camera and a smartphone.
IMPORTANT!
• Before changing the wireless LAN password, unpair the camera from its paired
smartphone (page 172).
1. Use [4] and [6] to move the cursor to the password digit you want to
change.
2. Use [8] and [2] to change the currently selected digit.
3. When the password is the way you want, move the cursor to “Apply”
and then press [SET].
NOTE
• Changing the wireless LAN password will terminate the connection with the
smartphone. To reconnect with the smartphone, configure wireless connection
settings (page 158). If your smartphone does not support Bluetooth Smart, perform
the operations below to change your smartphone’s Wi-Fi settings.
– iPhone:
Tap the right arrow of the field where the SSID of the camera is displayed in the
Wi-Fi settings to delete network settings. After deleting, select the camera SSID
again and input the new password.
– Android terminal:
Tap the field where the SSID of the camera is displayed in the Wi-Fi settings and
select Forget. Select the camera SSID again and input the new password.
Changing the Camera Password for Wireless LAN Connection
(WLAN password)
Item name: WLAN password