User Manual

141
Other Playback Functions (PLAY MENU)
5. Disconnect the camera from the computer (pages 180, 183).
You can use the procedure below to convert snapshots shot with this camera to a
movie. Selecting a group will include all of the images in the group in one movie. You
can use up to 1,000 snapshots in a movie.
1. Use [8], [2], [4], and [6] to move the blue boundary to a snapshot
you want to include in the movie and then press [SET].
This will select the check box in the lower left corner of the image and move the
blue boundary to the next image.
• To clear (deselect) a check box, move the blue boundary to the applicable
image and then press [SET].
• Selecting a group and pressing [SET] will select all of the images in the group
for inclusion in the movie.
• To view a particular image, rotate the zoom controller.
2. Repeat step 1 to select other images you want to include in the movie.
After you are finished selecting images, press [MENU].
3. Use [8] and [2] to select the playback speed and then press [SET].
This creates a movie using the selected snapshots.
NOTE
• Movie image quality depends on the size of the snapshots.
3M and greater: FHD
2M or 1M: HD
0.8M or VGA: STD
Using Snapshots to Create a Movie (Make Movie)
Menu item: Make Movie