PLAYBACK PLAYBACK 3. Use [ ] (forward) or [ ] (back) to scroll You can use the camera’s built-in monitor screen to view images after you record them. through files on the monitor screen. Basic Playback Operation Use the following procedure to scroll through files stored in the camera’s memory. NOTES 1. Press the power Power button • Holding down [ ] or [ ] scrolls images at high speed.
PLAYBACK IMPORTANT! Playing an Audio Snapshot • Audio volume can be adjusted only when playback is being performed or is paused. Perform the steps below to display an audio snapshot (indicated by a indicator) and play its audio. 1. In the PLAY mode, use [ ] and [ ] until the image you want is displayed. 2. Press [SET]. • This plays back the audio that accompanies the displayed image. • You can perform the following operations while audio is playing.
PLAYBACK 1. In the PLAY mode, use [ ] and [ ] to scroll Flipping the Display through images on the monitor screen and display the one you want. The following procedure flips the image 180 degrees. This comes in handy when you want to show someone standing in front of you an image on the monitor screen. 2. Press the shutter release button and [SET] at the same time. [SET] • This flips the image 180 degrees.
PLAYBACK 3. Use [ ], [ ], [ ], and [ ] to shift the image Zooming the Display Image up, down, left, or right. Perform the following procedure to zoom the image currently on the monitor screen up to four times its normal size. 4. Press [MENU] to return the image to its original size. 1. In the PLAY mode, use [ ] and [ ] to display IMPORTANT! the image you want. • You cannot enlarge a movie image.
PLAYBACK 4. Use [ ] and [ ] to select the setting you Resizing an Image want, and then press [SET]. You can use the following procedure to change a snapshot image to either SXGA size (1280 x 960 pixels) or VGA size (640 x 480 pixels). • VGA is the optimum image size for attachment to e-mail messages or incorporation into Web pages. 1. In the PLAY mode, press [MENU].
PLAYBACK 5. Use [ ], [ ], [ ], and [ ] to move the Cropping an Image cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary. Use the following procedure when you want to crop a portion of an enlarged image and use the remaining part of the image as an e-mail attachment, Web page image, etc. 6. Press [SET] to extract the part of the image 1. In the PLAY mode, use [ ] and [ ] to scroll enclosed in the cropping boundary.
PLAYBACK IMPORTANT! Playing a Movie • You cannot repeat play a movie. To play a movie more than once, repeat the steps of the above procedure. • This camera can also play back audio recordings. Note the following points when playing back audio. — Audio volume can be adjusted only when playback is being performed or is paused. Use the following procedure to play back a movie that was recorded in the movie mode. 1.
PLAYBACK Example: When there are 20 images in memory, and Image 1 is displayed first Displaying the 9-image View The following procedure displays nine images on the monitor screen at the same time. 1. In the PLAY mode, press the zoom button ( 18 19 6 7 8 15 16 17 20 1 2 9 10 11 18 19 20 3 4 5 12 13 14 1 2 3 ). 3.
PLAYBACK Selecting a Specific Image in the 9image View Displaying the Calendar Screen Use the following procedure to display a 1-month calendar. While the calendar is on the display, you can select a date, which displays the first image recorded on that date. This helps to make it easy to find the images you want. 1. Display the 9-image view. 2. Use [ ], [ ], [ ], and Selection boundary [ ] to move the selection boundary up, down, left, or right until it is located at the image you want to view. 1.
PLAYBACK • Pressing [ ] while the date selection cursor is located anywhere in the top line of the calendar causes the previous month to appear. Playing a Slide Show Slide Show automatically plays back images in sequence at a fixed interval. • Pressing [ ] while the date selection cursor is located anywhere in the bottom line of the calendar causes the next month to appear. • To exit the calendar screen, press [MENU] or the ( zoom button.
PLAYBACK 3. Configure the slideshow settings. IMPORTANT! • Note that all buttons are disabled while an image change is in progress. Wait until an image is stopped on the monitor screen before performing a button operation, or hold down the button until the image stops. • When the slideshow comes to a movie file, it plays the movie once and advances to the next file. • When the slideshow comes to an audio snapshot or voice recording file, it plays the audio once and then advances to the next file.
PLAYBACK ■ Selecting a Particular Image for a Slideshow To specify the slideshow images When you select “One image” as the slideshow type, the slide show displays only one image, without changing it. Use this setting when you want a particular image to remain on the display while the camera is on the USB cradle (Photo Stand feature). 1. Use [ ] and [ ] to select “Images”, and then press [ ]. 2. Use [ ] and [ ] to select the setting you want, and then press [SET]. To do this: Select this setting: 1.
PLAYBACK To specify the slideshow time To set the slideshow interval 1. Use [ ] and [ ] to select “Time”. 1. Use [ ] and [ ] to select “Interval”. 2. Use [ ] and [ ] to specify the time setting 2. Use [ ] and [ ] to specify the interval setting you want, and then press [SET]. you want, and then press [SET]. • You can specify a time in the range of 1 to 60 minutes. • You can specify “MAX”, or a value in the range of 1 to 30 seconds as the interval.
PLAYBACK 3. To stop the Phot Stand slideshow, press Using the Photo Stand Feature [PHOTO] again. The “Photo Stand” feature lets you specify what should appear on the camera’s monitor screen while the camera is on its USB cradle. You can play a Photo Stand slideshow without worrying about remaining battery power, or you can specify display of a particular image. Photo Stand feature operations are performed in accordance with slideshow setting.
PLAYBACK 4. Use [ ] and [ ] to Rotating the Display Image select “Rotate”, and then press [SET]. Use the following procedure to rotate the image 90 degrees and register the rotation information along with the image. After you do this, the image is always displayed in its rotated orientation whenever it appears during a slideshow (page 97) or on your computer screen. Note that the image is rotated automatically during a slideshow only.
PLAYBACK IMPORTANT! Using Image Roulette • Image Roulette does not play movie files or display voice recording images. • Image Roulette is disabled when there is only one snapshot image available. • Note that Image Roulette works only with images recorded with this camera. Image Roulette may not operate properly when other types of images are in memory. • If you do not start another Image Roulette operation for about one minute after the final image appears, the camera enters its normal PLAY mode.
PLAYBACK 1. In the PLAY mode, use [ ] and [ ] to scroll Adding Audio to a Snapshot through snapshots until the one to which you want to add audio is displayed. The “after-recording” feature lets you add audio to snapshots after they are recorded. You can also re-record an audio image (one with a icon on it). 2. Press [MENU]. • Audio Format: WAVE/ADPCM recording format This is the Windows standard format for audio recording. The file extension of a WAVE/ADPCM file is “.WAV”. 3.
PLAYBACK IMPORTANT! To re-record audio • Keep the microphone on the front of the camera pointed at the subject. • Take care that you do not block the microphone with your fingers. 1. In the PLAY mode, use [ ] and [ ] to scroll through snapshots until the one whose audio you want to re-record is displayed. 2. Select the “PLAY” tab, select “Dubbing”, and then press [ ]. Microphone 3. Use [ ] and [ ] to select “Delete”, and then press [SET].
PLAYBACK IMPORTANT! Playing Back a Voice Recording File • Audio volume can be adjusted only when playback is being performed or is paused. • If your recording has index marks (page 80) inside it, you can jump to the index mark before or after the current playback location by pausing playback and then pressing [ ] or [ ]. Next, press [SET] to resume playback from the index mark position. Perform the following steps to play back a voice recording file. 1.
