User Guide

67
OTHER RECORDING FUNCTIONS
6. Use [왗] and [왘] to
display the image
whose setup you
want to register as a
Best Shot scene.
7. Use [왖] and [왔] to
select “Save”, and
then press [SET].
• This registers the setup.
• Now you can use the
procedure on page 65
to select your user
setup for recording.
IMPORTANT!
• Setups that you register as Best Shot sample scenes
are located after the built-in sample scenes.
• When a Best Shot user setup is recalled, the monitor
screen in step 4 of the procedure on page 65
displays the text “Recall Favorites”.
• Note that formatting the built-in memory (page 117)
deletes all Best Shot user setups.
NOTES
• Best Shot user setups are located in the camera’s
built-in memory after the built-in sample scenes.
• The following are the settings that are included in a
Best Shot user setup: focus mode, EV shift value,
white balance mode, flash mode, and ISO sensitivity.
• Note that images recorded with this camera only can
be used to create a Best Shot user setup.
• You can have up to 999 Best Shot user setups in the
camera’s built-in memory at one time.
• You can check the current setup of a scene by
displaying the various setting menus.
• User setups are assigned file names using the format
“UEXZ3nnn.jpe” (where n = 0 to 9).