User`s guide

Table Of Contents

OTHER RECORDING FUNCTIONS

Using Continuous Shutter

You can configure the camera to record only a single

snapshot each time the shutter button is pressed, or to

keep recording as long as the shutter button remains

depressed. You can select from among the following three

continuous shutter modes.

• Normal-speed continuous shutter

You can continually record images until memory becomes

full.

• High-speed continuous shutter

Record up to three consecutive images at high speed.

• Flash continuous shutter

Use this mode to record up to three consecutive images,

firing the flash for each one.

In the REC mode, press [MENU].

Select the “REC” tab, select “Continuous”,

and then press [왘].

Use [왖] and [왔] to

select “Normal

Speed”, “High

Speed”, or “Flash

Cont. ”, and then

press [SET].

• This causes the

applicable icon to

appear on the monitor

screen.

: Normal-speed continuous shutter

: High-speed continuous shutter

: Flash continuous shutter

• With “Off”, snapshots are recorded one at a time.

IMPORTANT!

• Turning off the camera automatically turns off the

continuous shutter mode.