User manual

Copyright© 2007. All Rights Reserved by ATP Electronics Taiwan Inc.
7
2. LED status description
2.1. LED 1: Power Status in Light Green/Red
2.1.1: Power ON/OFF: Green Light will turn on for 2~3 seconds
2.1.2. Remaining Power Status:
70% or more power -> Continuous green light
70%~20% power -> Flashes in Green ~ ~
Under 20% power -> Light in Red
Low Power -> Auto Power Off
2.2. LED 2: GPS Status
2.2.1. While GPS Signal is Active: Blue light flashes
--- 5 seconds ---
2.3. LED 3: Memory Status/”On the Go” (OTG) Operating Mode Status
2.3.1. OTG data sync -> Flashes in Yellow while syncing data  
LED1 Power Status
: 
Green light
Power Status: 
Red light
Date: 2007-04-12
Time: 09:50:35
LED2 GPS Status
: 
Blue light
Date: 2007-04-12
Time: 09:50:35
LED3 Memory Status: 
Yellow light
Date: 2007-04-12
Time: 09:50:35