User manual

Copyright© 2007. All Rights Reserved by ATP Electronics Taiwan Inc.
6
Product Features
The ATP Photo Finder calculates and records GPS position data and allows you to precisely track the exact
location and time of where your pictures were taken. Make sure that the Photo Finder is activated while
you’re taking pictures with your digital camera. After you finish taking pictures, simply insert your SD card or
Memory Stick Pro Duo card into the Photo Finder card slot and the GPS data will be synchronized and added to
all pictures on the card. Even more convenient is the fact that this is all performed “on the go” without a PC.
All you need to carry with you is your digital camera to take the pictures and the ATP Photo Finder to log your
location.
Photos GPS tagged by the ATP Photo Finger can be used with any GPS compatible photo software. For
example, when used with the Google supplied software “Picasa2”, “Google Earth”, or “Google Map”, your
photos will be shown on an online map, giving you a whole new way to organize, enjoy and share your
pictures. Share your pictures and trip route with your friends and family. More importantly, never forget
where you took a picture again. You can also use your GPS tagged photos in a compatible GPS navigation
system, allowing for features such as choosing your destination and landmarks visually.
1. Function and keys description
1
2
3
4
6
5
7
8
9
10
11
1 LED 1: Yellow Flash memory status 7 Carabiner loop Attachment loop
2 LED 2: Blue GPS status 8 Power/Status button Power ON/Off, status select
3 LED 3: Green/Red Power status 9 Select key 1 UI function select “ NO ”
4 LCD Screen Status display 10 Select key 2 UI function select “ YES “
5 Mini USB connector Connect to camera/Card reader 11 Battery cover AAA battery cover
6 Memory card slot SD/MMC/MS cards slot P.S. For detailed function descriptions, please see below.