User manual

Copyright© 2007. All Rights Reserved by ATP Electronics Taiwan Inc.
14
Additional Information
1. Brief Specifications
GPS Module
Chipset SiRF Star III
Frequency L1 1575.42MHz.
Code C.A. Code.
Channels 20
Sensitivity (Tracking) -155dBm.
Cold start 45 sec
Warm start 35 sec
Hot start 1 sec
Reacquisition 0.1sec typical
Position accuracy 25m CEP.≦
≦≦
≦
Maximum altitude 18000 m
Maximum velocity 514 m/s
Trickle power mode Duty cycle 34%. (Variable) Default: disable (option: enable)≦
≦≦
≦
Update rate Continuous operation: 1Hz
Testability
It shall be able to be tested by SiRF test mode 4 and single channel
simulator.
Protocol setup It shall store the protocol setup in the SRAM memory.
Interface
I/O Pin 30pin stamp holes
Power consumption
Vcc DC 3.3 ±5%
Current GPSM-013: Current 72mA@3.3V typical (w/o ext. antenna)
Trickle power mode Average current 39mA@3.3V typical (w/o ext. Antenna)≦
≦≦
≦
Environment
Operating temperature -30 ~ 85℃
℃℃
℃
Humidity 95%≦
≦≦
≦
Display 128x32 Dot Matrix FSTN with backlight
UI Language
English (Default )
Japanese ( Optional )
Traditional Chinese ( Optional )
Simply Chinese ( Optional )
GPS Frequency Response 1575.42 MHz (L1 Band, C/A code)
Operating Temperature -20 to +60 degrees C (-4 to +140 degrees F)
Storage Temperature -20 to +60 degrees C (-4 to +140 degrees F)
Operating Time More than 8 Hours
Connectivity Card
Complies with Compact Flash Specification Revision 4.0
Complies with SD 2.0 SDHC
Complies with MMC 4.2
Complies with Memory Stick PRO/Duo
OTG Interface Mini USB
Embedded Memory 128MB NAND Flash
Battery AAA x 2
USB cable Mini USB to Type A female connector cable