User manual

Copyright© 2007. All Rights Reserved by ATP Electronics Taiwan Inc.
11
Photo Finder Basic Usage Instructions and Features
The ATP Photo Finder records GPS log files of your position and time in 5 second intervals and stores this
information in internal memory. Simply turn ON the power and the tracking/logging automatically starts. With
an internal memory capacity of 32/128 MB (optional), the device can log your position information for over
130/550 hours.
Basic Features:
 Simple operation
There’s no need for a complex set-up or installation process. Turn on the Photo Finder to begin tracking
and logging as you’re taking pictures. Then sync the logged position information to your memory card.
You now have GPS position tagged photos!
 Easy to carry
With a compact and lightweight (only about 60 grams) design, the ATP Photo Finder is convenient for
travel and outdoor use.
 Store data for up to 150/600* hours; logging interval Approx. 5 seconds
The ATP Photo Finder records approximately 150/600* hours of GPS data, equivalent to about 150/600*
hours of continuous non-stop tracking. The logging interval is Approx. 5 seconds and you can get the
detail GPS information. The number of log entries and recording time may differ depending on satellite
coverage and signal strength.
(*) Optional Flash memory capacity: store data for 150 hours is 32MB; 600 hours is 128MB.
 High Performance GPS Receiver
The built-in high performance GPS antenna module can search and communicate with 20
channels/satellites simultaneously.
 “On The Go” mode data sync and GPS coordinates mapping
Sync your pictures with GPS positioning data without the need for a PC environment.
 Built-in SD/MMC/MS Card Slot and direct USB Connectivity
The ATP Photo Finder is compatible out of the box with most digital cameras, supporting SD/MMC/MS
memory cards. CF/xD memory cards can also be synced with position data with use of a card reader.
Card reader
Digital camera
SD/MMC/MS cards