EN Digital Camera User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.
Accessories As you unpack your camera, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . .
]\Using BEST SHOT 50 Shooting with Triple Shot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Motion Shutter to Trigger a Self-timer Operation . .(Motion Shutter) . . Digitally Correcting for Overexposure and Underexposure . . . . . . (HDR) . . Shooting with High Speed Night Scene . . . . . . . . . . . . .(HS Night Scene) . . Shooting with High Speed Night Scene and Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . . (HS Night Scene Portrait) . .
]\Establishing a Wireless LAN Connection 79 Wireless LAN Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Establishing a Connection between a Smartphone and Your Camera . . . . . . 81 ] Installing the EXILIM Remote App on Your Smartphone . . . . . . . . . . . . . . . . . . 81 ] Configuring Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Using a Smartphone as a Camera Remote Controller . (Remote Capture) . .
Changing the Camera Password for Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . . . (WLAN password) . Displaying a Startup Screen at Power On . . . . . . . . . . . . . . . . . .(Startup) . Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . .(Format) . Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . .(Reset) . ]\Appendix 106 106 107 107 108 Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Guide The numbers in parentheses indicate the pages where each item is explained.
Monitor Screen Contents and How to Change Them The monitor screen uses various indicators, icons, and values to keep you informed of the camera’s status. • The sample screens in this section are intended to show you the locations of all the indicators and figures that can appear on the monitor screen in various modes. They do not represent screens that actually appear on the camera. .
. Snapshot Viewing 12 3 4 bm bl bk 9 8 7 bq bp bo bn 5 6 1Protect indicator (page 76) ” (Show Icons) icon 2“ 3Folder name/file name (page 98) 4Snapshot image size (page 58) 5Battery level indicator (page 24) 6Date/time (pages 24, 104) 7Image menu icon (page 67) 8Shutter speed 9 Make-up (page 43) bkBrightness (page 59) blISO sensitivity (page 61) bmWhite Balance (page 60) bnMenu icon (page 70) boDelete icon (page 34) bpImage send icon (pages 86, 88) bqREC mode icon (page 29) .
Quick Start Basics What you can do with your CASIO camera Your CASIO camera is packed with a powerful selection of features and functions to make recording of digital images easier, including the following main functions. A variety of shooting styles The frame can be opened and the LCD monitor screen rotated into positions that make long-term shooting more comfortable and simplify self-shooting. *See page 13 for more information.
ART SHOT A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting. “ART SHOT” provides the following effects: HDR Art, Crystal Ball, Sparkling Shot, Toy Camera, Soft Focus, Light Tone, Pop, Sepia, Monochrome, Miniature, Fisheye. *See page 40 for more information. Paint Draw figures, write text, or stamp information into a recorded snapshot. *See page 72 for more information.
Changing the Camera Style to Suit Shooting Conditions You can change the configuration of the camera by opening or closing the frame and rotating the monitor screen panel to suit shooting conditions. IMPORTANT! • Do not apply strong pressure to the surface of the monitor screen. Doing so can damage it. • Never touch the lens with your fingers. Finger smudges, dirt, and other foreign matter on the lens can interfere with proper operation of the camera.
Rotating the Monitor Screen Use the steps below to rotate the monitor screen. NOTE • While holding the monitor screen panel as shown in the illustration, you can rotate it 180 degrees clockwise and 90 degrees counterclockwise. • The monitor screen panel can also be rotated when the frame is closed. 1. Hold the camera as shown in the illustration. 2. Firmly holding the frame, carefully rotate the monitor screen panel.
Camera Configurations You can open the frame and rotate the monitor screen for a variety of different styles. Normal Shooting Movie Recording Shoot with the monitor screen facing the opposite direction of the lens. Open the frame 90 degrees and hold the frame. You can also shoot with the camera upside down, if you like. Tabletop Shooting Point the monitor screen and lens in the same direction and open the frame about 30 degrees so the camera can stand up.
NOTE • When shooting hold the camera still. Carefully press the shutter button and take care to avoid all movement as the shutter releases and for a few moments after it releases. • Take care that your fingers and the strap do not cover LED light any of the areas indicated in the illustration. • To protect against accidentally dropping the camera, attach the wrist strap (commercially available or separately available) and make sure it is around your fingers or wrist while you are operating the camera.
Drag Holding your finger against the screen as you drag it up, down, left, or right. Use drag to move a screen image to a different location, and to scroll between images. Spread Holding your thumb and forefinger against the screen as you spread them out. Use spread to enlarge the screen image. Squeeze Holding your thumb and forefinger against the screen as you bring them together. Use squeeze to reduce the size of the screen image.
First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-150) for power. Never try to use any other type of battery. Loading the Battery 1. Open the frame (page 13). 2. Open the cover. While depressing the [OPEN] button, slide the cover in the direction of arrow 2 in the nearby illustration.
To replace the battery 1. Open the cover and remove the current battery. As shown in the illustration, pull up the edge of the battery to remove it. 2. Load a new battery. Charge the Battery You can use either of the two following methods to charge the battery. Before charging the battery, use the procedure under “Opening and Closing the Frame” (page 13) to open the frame. • USB-AC adaptor • USB connection to a computer .
IMPORTANT! • A battery that has not been used for a long time, or ambient temperature extremes can cause charging to take longer than normal. If charging takes longer than about five hours, a timer will terminate it automatically, even if the battery is not fully charged. This is indicated by the back lamp flashing red. If the battery has not been used for a very long time, charging may be terminated automatically and the back lamp may start flashing red after only about 60 minutes.
USB Cable Connection Precautions • When connecting the USB cable to the camera, make sure that the cable connector and monitor screen panel are oriented correctly as shown in the illustration below. Make sure that the u mark side of the USB cable connector and the front of the monitor screen panel (the side opposite that of the monitor screen) are facing in the same direction. Front of monitor screen panel The back lamp always initially light after charging starts.
. To charge using a USB connection to a computer USB connection lets you charge the battery while it is loaded in the camera. While the camera is turned off, connect in the sequence shown below (1, 2). Computer (power turned on) [USB] port USB port USB 2 1 Micro USB cable (included with camera) u mark of the small (micro USB) connector facing the side opposite that of the monitor screen. • If the camera is on, press [p] (Power) to turn it off before connecting it to your computer.
Back Lamp Operation Back lamp Lamp Status Description Lit Red, (Lit/Flashing Amber) Charging Flashing Red Abnormal ambient temperature, charging taking abnormally long, or battery problem (page 120) Off, (Lit Green) Charging complete • The information in parentheses in the above table shows the lamp status while the camera is turned on during charging.
Checking the Current Battery Level As battery power is consumed, a battery indicator on the monitor screen indicates its current level as shown below. Remaining Power High Battery Indicator Indicator Color Low * White * * White * * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode.
1. Press [p] (Power) to turn on the camera. 2. Drag (page 17) upwards and downwards until you find the language you want, and then touch to select it. 3. Touch the date display format you want. Example: July 10, 2015 YY/MM/DD * 15/7/10 DD/MM/YY * 10/7/15 MM/DD/YY * 7/10/15 [p] (Power) 4. Touch the value you want to change (year, month, day, hour, minute). 5. Touch “ value. ”, “ ” to change the currently selected • Touching and holding “ ”, “ ” will change the setting at high speed.
Preparing a Memory Card Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available memory card for greater capacity. The camera does not come with a memory card. Images recorded while a memory card is loaded are saved to the memory card. When no memory card is loaded, images are saved to built-in memory. • For information about memory card capacities, see page 130.
To load a memory card 1. 2. 3. Press [p] (Power) to turn off the camera and then open the frame (page 13). 1 While holding down [OPEN], slide the cover in the direction of arrow 2 in the nearby illustration to remove it. 3 2 [OPEN] button Load a memory card. Positioning the memory card as shown in the nearby illustration insert it into the camera’s memory card slot and press until you hear it click into place. Front Front 4. Close the cover.
. To replace the memory card Press the memory card and then release it. This will cause it to pop out of the memory card slot slightly. Pull the card out the rest of the way and then insert another one. • Never remove a card from the camera while the back lamp is flashing green. Doing so can cause the image save operation to fail and even damage the memory card. To format (initialize) a new memory card Format a memory card on the camera before using it for the first time.
Turning Power On and Off . To turn on the camera Back lamp Press [p] (Power). This will turn on the camera, which is indicated when the back lamp lights green, and enter the REC mode. Entering the REC Mode and PLAY Mode To enter the PLAY mode In the REC mode, touch “ ” (PLAY). • If “ ” (PLAY) is not displayed on the screen, you can touching the Review image (page 63), or switch to the PLAY mode by touching “ ” (Show Icons) and then touching “ ” (PLAY).
To Shoot a Snapshot Your camera has a variety of different recording modes to suit various shooting conditions and objectives (page 38). This section explains general shooting procedures using the auto recording mode. Selecting an Auto Recording Mode You can select one of two auto recording modes (Auto or Premium Auto Pro) according to your digital imaging needs. Setting Auto Premium Auto Pro REC Screen Icon Display Description This is the standard Auto recording mode.
To shoot a snapshot 1. Point the camera at the subject. If you are using Premium Auto Pro, text will appear on the monitor screen describing the type of shot the camera has detected. • Spread your fingers apart on the screen to change the zoom factor (page 45). Type of shot + (Telephoto) 2. – (Wide Angle) Half-press the shutter button to focus the image. Shutter button When focus is complete, the camera will beep, the back lamp will light green, and the focus frame will turn green.
3. Continuing to keep the camera still, press the shutter button the rest of the way down. Full-press This records the snapshot. Snap (Image is recorded.) Recording a Movie Touch “ ” (Movie) to start movie recording. Touch “ ” (Movie Stop) to stop recording. See page 47 for details. “ “ ” (Movie)/ ” (Movie Stop) NOTE • You also can shoot a snapshot by touching a point on the monitor screen (page 56). • You can specify the image size for snapshots. See page 58 for more information. .
. Shooting with Premium Auto Pro • Some menu items are not available while Premium Auto Pro is in use (page 55). Only the menu items whose settings can be configured will be displayed on the menus while Premium Auto Pro is in use. • In addition to shutter speed and ISO sensitivity, the camera automatically executes the following operation as required when shooting with Premium Auto Pro. – Auto Focus is normally performed until you half-press the shutter button.
2. Drag left or right across the screen image to scroll through the snapshots. NOTE • Pressing the shutter button while in the PLAY mode or while a menu screen is displayed will switch directly to the REC mode. • A question mark (?) will be displayed for images that cannot be displayed for some reason. Deleting Snapshots and Movies If memory becomes full, you can delete snapshots and movies you no longer need in order to free up storage and record more images.
. To delete specific files 1. Enter the PLAY mode. 2. Touch “ 3. Touch “ 4. Touch “Delete Files”. ” (Show Icons). ”. This displays a file selection screen. 5. Touch a file you want to delete. This will select the check box of the selected file’s image. 6. After you are finished selecting files, touch “Delete”. 7. Touch “Delete”. This deletes the files you selected. • To cancel the delete operation, touch “Cancel” in step 6. NOTE • You can also delete images using the image menu (page 67).
Snapshot Shooting Precautions Operation • If unwanted light is shining onto the lens, shade the lens with your hand when shooting an image. Monitor Screen when Shooting Snapshots • Subject brightness conditions can cause monitor screen response to slow and can cause digital noise in the monitor screen image. • The image that appears on the monitor screen is for image composition. The actual image will be recorded in accordance with the currently selected recording mode (page 38).
Recording Images Touching the monitor screen in the REC mode will display a screen for configuring REC mode settings. . To configure REC mode settings 1. Press [p] (Power) to turn on the camera and enter the REC mode. • If the camera is in the PLAY mode, touch “ to enter the REC mode. ” (REC) [p] (Power) 2. Touch “ 3. Touch the item whose setting you want to change. ” (Show Icons).
Selecting a Recording Mode The camera has a variety of different recording modes. 1. In the REC mode, touch the “ Icons). 2. Touch the recording mode icon. 3. Touch the icon of the recording mode you want to use. ” (Show Recording mode icon This enters the selected recording mode. Auto Standard Auto recording mode. This is the mode normally used for shooting (page 30).
Shooting with Posing Shot (Posing Shot) Posing Shot lets you shoot five successive snapshots, as the camera provides voice guidance. The result is a series of shots with different poses and expressions. 1. In the REC mode, touch the “ 2. Touch the recording mode icon. 3. Touch “ 4. Press the shutter button to start recording. ” (Show Icons). ” (Posing Shot). Shoot in accordance with the voice guidance from the camera.
Shooting with Artistic Effects (ART SHOT) A variety of artistic effects help to make even common, ordinary subjects become more novel and exciting. Scene Description HDR Art Uses HDR (High Dynamic Range, page 53) to turn normal images into works of art. Crystal Ball Creates a mysterious effect by placing the image in a bubble floating in midair. Sparkling Shot Softens the overall image and adds points of light for a sparkle effect.
5. Touch the “ART” icon. The intensity of the selected effect can be adjusted as described below. Note, however, that the “Miniature” effect cannot be adjusted. Scene Adjustment HDR Art Effect level Crystal Ball Effect type Sparkling Shot Effect type Toy Camera Hue Soft Focus Effect level Light Tone Hue Pop Effect level Sepia Effect level Monochrome Effect level Fisheye Effect level 6. Touch the level you want to select. 7. Touch “OK”. 8. Press the shutter button to shoot.
Shooting Three Versions of an Image with Different Skin Tone Settings (Make-up BKT) Make-up Bracketing (Make-up BKT) lets you shoot three versions of the same image with the press of the shutter button, each with a different Skin Tone setting. This helps you get the skin tone effect you want, even if you do not know exactly what settings to use. 1. In the REC mode, touch “ 2. Touch the Recording mode icon. 3. Touch “ 4. Touch “ 5.
Recording Beautiful Portraits (Make-up) Make-up enables adjustment of human skin tone hues and texture, and softening of facial shadows caused by harsh sunlight for better looking portraits. • Make-up can be used with the recording modes listed below. – Premium Auto Pro – Posing Shot – Motion Shutter (BEST SHOT) – Make-up BKT – Following BEST SHOT scene Motion Shutter, Triple Shot, HS Night Scene Portrait 1.
Using the Camera as a Mirror You can use the procedure below to configure the camera so its monitor screen acts as a mirror. • Images cannot be recorded while in the Mirror Mode. Mirror Mode image data is not saved in camera memory. • The Mirror Mode can be entered only while the camera is positioned in portrait (vertical) orientation. It cannot be entered while the camera is in landscape (horizontal) orientation. 1.
Shooting with Zoom Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting. HD Zoom Allows greater zoom capabilities by cutting out a portion of the original image and enlarging it, without deterioration of image quality. SR Zoom Applies super resolution technology to suppress image deterioration. Digital zoom A digital process is used to enlarge the center of the image, so there is deterioration of image quality.
. Zoom Factor • The image deterioration point depends on the image size (page 58). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point. Image Size Undeteriorated Zoom Limit Maximum Zoom Factor 12M 1.5X 4.0X 3M 2.9X 7.8X Shooting a Self-portrait You can configure the camera so the monitor screen and lens are facing in the same direction. This means you can shoot with the self-timer as you compose the self-portrait on the monitor screen.
To record a movie The following procedure explains how to record a movie. • You can record a movie while one of the following recording modes is selected. – Auto – Premium Auto Pro – Following BEST SHOT scene HS Night Scene, HS Night Scene Portrait, Food, Nails 1. In the REC mode, touch “ 2. Touch “MENU”. 3. Drag upwards and downwards until you find “Movie Quality”, and then touch to select it. 4. Touch the item whose setting you want to change. Movie Quality Full HD HD HS240 5.
6. Touch “ ” (Movie). This will start recording. • Monaural audio is also recorded during movie recording while “Full HD” or “HD” is selected for the movie quality setting. • Touching “o” while recording is in progress will cause the remaining recording time and “R” to appear. Touch “o” again to switch back to the elapsed recording time. • Zoom is supported during movie recording when “Full HD” or “HD” is selected for the movie quality setting (page 45).
IMPORTANT! • Spending a long time using movie recording will cause the camera to become slightly warm to the touch. This is normal and does not indicate malfunction. The camera may automatically adjust its monitor screen brightness in order to reduce heat generation. • The camera also records audio along with Full HD and HD movies. Note the following points when shooting a movie. – Take care that the microphone is not blocked by your fingers, etc.
Using BEST SHOT BEST SHOT provides you with a collection of sample “scenes” that show a variety of different types of shooting conditions. When you need to change the setup of the camera, simply find the scene that matches what you are trying to achieve, and the camera sets up for it automatically. This helps to minimize the chance of ruined images due to poor exposure and shutter speed settings. . To shoot an image with BEST SHOT 1. In the REC mode, touch “ (page 38). 2. Touch the recording mode icon.
Shooting with Triple Shot Triple Shot shoots a burst of three images and stores them in memory. This feature is great for making sure you don’t miss those special moments when kids are around. 1. Select “Triple Shot” scene (page 50). 2. Point the camera at the subject and then half-press the shutter button. The camera will start pre-recording images at this time.
Using Motion Shutter to Trigger a Self-timer Operation (Motion Shutter) With Motion Shutter the camera automatically triggers a selftimer countdown whenever it detects subject movement within an icon you specify on the monitor screen. This means you can control operation of the self-timer from a distance by waving your hand, so you can include yourself in the image being shot. 1. Select “ 2.
Digitally Correcting for Overexposure and Underexposure (HDR) With HDR (High Dynamic Range), the camera shoots a series of CS images using different exposure settings and combines them into a final image to correct for overexposure or underexposure of subjects of different brightness levels. 1. Select “HDR” scene (page 50). 2. Press the shutter button to shoot. NOTE • This function works best when the camera is made stationary by placing it on a level surface, etc.
Shooting with High Speed Night Scene and Portraits (HS Night Scene Portrait) 1. Select “HS Night Scene Portrait” scene (page 50). 2. When you are ready to shoot, press the shutter button. NOTE • With this BEST SHOT scene, the LED light setting automatically becomes “Auto”. • When holding the camera by hand while shooting with this BEST SHOT scene, make sure that the subjects remain as still as possible as the camera shoots the series of images.
Advanced Recording Settings The following are menu operations you can use to configure various camera settings. Using the REC Menu . Example Menu Screen Operation 1. In the REC mode, touch “ 2. Touch “MENU”. ” (Show Icons). This will display the menu screen. • Menu contents are different in the REC mode and PLAY mode. 3. Drag upwards and downwards until you find the item whose setting you want to change. 4. Touch the item. 5.
Using Touch Shutter (Touch Shutter) Procedure Enter the “REC Mode” * MENU * Touch Shutter You can use the procedure below to shoot a snapshot. 1. Touch “On”. 2. Point the camera at the subject. 3. When you want to shoot, touch the monitor screen. The camera automatically comes into focus and then shoots. • You can still use the shutter button to shoot even when “On” is selected for Touch Shutter.
NOTE • The Self-timer configured with the above menu cannot be used under the following conditions. – Posing Shot (page 39) – Triple Shot (page 51) – Motion Shutter (page 52) – When the monitor screen and lens are facing in the same direction Using the LED Light (LED) Procedure Enter the “REC Mode” * MENU * LED Use the LED light when shooting where lighting is dim. The effectiveness of the LED light is reduced the further you are from the subject.
Changing the Image Size (Image Size) Procedure Enter the “REC Mode” * MENU * Image Size This setting can be used to configure snapshot image size. Image Size (Pixels) Suggested Print REC Screen Size and Icon Display Application Description 12M (4000x3000) Poster Print Good detail for better clarity even for images cropped from the original on a computer, etc. 3M (2048x1536) 3.5"×5" Print Best when preserving memory capacity is relatively more important than image quality.
Movie Image Quality Settings (Movie Quality) Procedure Enter the “REC Mode” * MENU * Movie Quality This setting can be used to configure movie image quality settings and to select either normal movie recording or High Speed Movie recording. For information about movie image quality settings, see page 47. Correcting Image Brightness (Brightness) Procedure Enter the “REC Mode” * MENU * Brightness You can manually adjust an image’s exposure value (EV value) before shooting it.
Adjusting White Balance (White Balance) Procedure Enter the “REC Mode” * MENU * White Balance You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting. 1. Touch the type of white balance you want to select. You can see the affect of the white balance setting you select on the monitor screen.
Specifying ISO Sensitivity (ISO) Procedure Enter the “REC Mode” * MENU * ISO ISO sensitivity is a measure of sensitivity to light. Setting Description Auto Adjusts sensitivity automatically according to conditions ISO 80 Lower sensitivity Slow shutter speed Less noise Fast shutter speed (Set for shooting in dimly lit areas.
Selecting a Focus Mode (Focus) Procedure Enter the “REC Mode” * MENU * Focus Changing to a different focus mode can help to achieve better focus. Settings AF (Auto Focus) Focus Mode REC Screen Type of Shot Icon Display Snapshot Movies None General recording Macro Close ups PF (Pan Focus) Shooting with a relatively wide focus range Infinity Scenery and other distant subjects Approximate Focus Range*1 Snapshot 8 cm to 9 (infinity) (3.1" to 9) Automatic Movies 52 cm to 9 (infinity) (20.
Using Focus Lock Subject to be focused on “Focus lock” is a technique you can use when you want to compose an image in which the subject you want to focus on is not within the focus frame in the center of the screen. 1. Align the monitor screen’s focus frame with the subject you want to focus on and then half-press the shutter button. Focus frame 2. Keeping the shutter button half-pressed (which maintains the focus setting), move the camera to compose the image. 3.
Viewing Snapshots and Movies Viewing Snapshots See page 33 for the procedure for viewing snapshots. Viewing a Movie 1. Touch “ 2. Drag left or right across the screen image to scroll through the movies until the one you want is displayed. ” (PLAY) to enter the PLAY mode. Image quality Movie icon: Movie recording time 3. Touch “ ” (Movie) to start playback. Playback in progress Playback paused Touch “|”. Touch “6”.
Movie Playback Controls Pause/Play Touch “|” (pause) or “6” (play). Fast forward/ Fast reverse During playback, touch “{” (fast reverse) or “}” (fast forward). • Each touch of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, touch “6”. Stop playback During playback, touch “.”. Volume adjustment During playback, touch “n” and then drag the volume bar to the desired level.
Editing a Movie on the Camera (Movie Editing) The Movie Editing feature lets you cut out a specific part of a movie. 1. Enter the PLAY mode and then start playback of the movie you want to edit. 2. When playback reaches the location where you want to cut, touch “|” to pause. 3. Touch “~”. 4. Touch the option that specifies what you want to cut. 5. ¡ Previous Cut Cuts everything from the beginning of the movie up to the current location.
Viewing the Image Menu The image menu shows multiple images on a single screen. 1. In the PLAY mode, touch “]” or squeeze your fingers on the screen. This displays the image menu. • Drag upwards or downwards to scroll to the next page of images. • To view the normal (single image) display mode, touch the image your want to view. • In the case of a movie, the first image in the movie is displayed. • A question mark (?) will be displayed for images that cannot be displayed for some reason.
Viewing Snapshots and Movies on a TV Screen Use a commercially available HDMI cable to connect the camera to the TV. • Use a commercially available HDMI cable that is marked with the logo shown to the right. 1. Open the frame (page 13). 2. Hook your nail into the groove of the [HDMI] cover and pull the cover in the direction indicated by the arrow to open it. 3. Turn off the camera and use a commercially available HDMI cable to connect the camera to a TV.
5. Turn on the camera. The camera monitor screen will shows a remote controller image. The TV screen will show a recorded image. • The contents of the remote controller image will depend on the type of image that is displayed on the TV screen. 6. Touch the camera monitor screen to perform operations. NOTE • Use a HDMI cable with a plug that is compatible with the camera’s HDMI micro connector on one end, and a plug that is compatible with your TV’s HDMI connector on the other end.
Other Playback Functions (PLAY) The following are menu operations you can use to configure various camera settings. Using the PLAY Menu . Example Menu Screen Operation 1. In the PLAY mode, touch “ 2. Touch “MENU”. ” (Show Icons). This will display the menu screen. • Menu contents are different in the REC mode and PLAY mode. 3. Touch the item whose setting you want to change. 4. Configure the setting of the item in accordance with the screen contents.
3. Repeat steps 1 and 2 to select a total of five snapshots. • The snapshots will appear in the Promotion Movie in the same sequence that you select them. • Touch a selected snapshot will de-select it. 4. Touch “OK”. 5. Touch “Length”, “Transition”, and “Music”, and configure settings for each item as required. 6. Length Select 15 seconds or 6 seconds. Transition Enable or disable the transition effect. Selecting “On” (enabled) applies a transition effect when changing from one image to the next.
Performing Paint Operations on an Image (Paint) Procedure Enter the PLAY Mode * Display snapshot * MENU * Paint You can use this function to draw on, write on, or stamp information into a recorded snapshot. If the original image size is 3M or larger, the post-paint image is saved as a 3M size image. 1. On the monitor screen, touch “ 2. Touch the pen type or the stamp you want to use. 3. Use the pen to write text or draw figures, or use the stamp to stamp information. ” or “ ”.
Playing a Slideshow on the Camera (Slideshow) Procedure Enter the PLAY Mode * MENU * Slideshow You can use the slideshow mode to automatically scroll through all of the images in camera memory. NOTE • All operations are disabled while the slideshow is transitioning from one image to another. • The time required for transition from one image to another may be longer in the case of an image that was not recorded with this camera. • To return to normal (single image) display, touch the screen.
2. Touch “OK”. This will cause the background of the subject you outlined to become gray. 3. Touch “ ” to select the area to be extracted and then touch “OK”. This will display the cut out subject. • To scroll back one screen, touch the “ Extracted subject screen 4. ” icon on the monitor screen. Original image with subject extracted After confirming that the part of the image to be extracted is the way you want, touch “OK”. This saves the extracted image.
Inserting a Subject into another Snapshot or Adding a Built-in Frame to a Snapshot (Paste subject) Procedure Enter the PLAY Mode * MENU * Paste subject You can add the camera’s built-in characters or frames to snapshots, or you can insert characters you create with “Cut out subject” (page 73) into snapshots. • Only an image that satisfies the following conditions can be used as a background image. – It must be a snapshot recorded with this camera or a snapshot transferred to this camera’s memory.
Protecting a File Against Deletion (Protect) Procedure Enter the PLAY Mode * MENU * Protect You can protect images to prevent them from being deleted. • A protected image will be indicated by “›”. All Files On Protects all files. All Files Off Unprotects all files. Select Protects and unprotects specific files. 1Drag upwards or downwards to display the image you want to protect. 2Touch an image to be protected, and “›” will appears on the image.
Rotating an Image (Rotation) Procedure Enter the PLAY Mode * MENU * Rotation 1. Drag upwards or downwards to display the image you want to rotate. 2. Touch “ ”. This will rotate the image 90 degrees to the left. 3. When the image is in the orientation you want, touch “ ”. NOTE • Note that this procedure does not actually change the image data. It simply alters how the image is displayed on the camera’s monitor screen. • An image that has been protected or zoomed cannot be rotated.
Cropping a Snapshot (Trimming) Procedure Enter the PLAY Mode * MENU * Trimming You can crop a snapshot to trim parts you do not need, and save the result in a separate file. The original snapshot is also retained. 1. Drag left or right to display the image you want to crop. 2. Touch “OK”. 3. Drag the image until the part you want to keep is displayed. • To enlarge the image, touch the screen with your thumb and forefinger and then spread them apart.
Establishing a Wireless LAN Connection Wireless LAN Functions Establishing a wireless LAN connection between the camera and a smartphone enables the functions described below. With this function: See page: You can do this: Remote Capture* Remotely control and shoot with the camera using a smartphone. 83 Send a snapshot that was just recorded with the camera to a smartphone. After sending an image to a smartphone, you can then upload it to a social networking service.
IMPORTANT! • Never use wireless LAN functions inside an aircraft or anywhere else where such operation is restricted. • Some smartphone models may not be able to play back movie files that are sent to the smartphone. • Depending on your smartphone model, its operating system version, and/or its remaining storage capacity can cause failure of a movie or snapshot save operation. After send operation, perform the required operation on your smartphone to ensure that the movie or snapshot was saved properly.
Establishing a Connection between a Smartphone and Your Camera Installing the EXILIM Remote Smartphone app on your smartphone makes it possible to remotely control the camera from your smartphone and to send images recorded with the camera to your smartphone. Use your smartphone to visit the EXILIM app site (http://www.casio.com.cn/dc/app/) and install the EXILIM Remote app. .
Configuring Wireless LAN Settings Use the procedure below to establish a wireless LAN connection between the camera and a smartphone for the first time. This operation is required for the first connection only. 1. On your camera, enter the REC mode and then touch “ Icons). 2. On your camera, touch the “ Capture) icon. ” (Show ” (Remote This will enable connection with a smartphone and the camera will display a screen for input of an SSID and password. 3.
Using a Smartphone as a Camera Remote Controller (Remote Capture) This function lets you remotely shoot a snapshot or movie with the camera using a smartphone. You also can perform remote zoom, self-timer, and other operations as well. 1. On your camera, enter the REC mode and then touch “ Icons). 2. On your camera, touch the “ 3. On your smartphone, start up the EXILIM Remote app. ” (Show ” (Remote Capture) icon. This will establish a connection between the smartphone and your camera.
. Controlling Your Camera with a Smartphone EXILIM Remote supports the Remote Capture operations listed below. This manual explains EXILIM Remote operations based on screens that appear using the iPhone version. Some operations may differ depending on your smartphone type. 2 3 1 bk 4 9 8 7 5 6 1 Exits Remote Capture. 2 Select to configure self-timer and LED light settings for snapshot shooting. The Remote Capture self-timer countdown time is 10 seconds (fixed). 3 Displays current LED light settings.
Sending a Just-recorded Snapshot to a Smartphone (Send Last Shot) You can use Send Last Shot to send a snapshot you just recorded with the camera to a smartphone. After sending an image to a smartphone, you can then upload it to a social networking service. • Note that you will not be able to use Send Last Shot to send a snapshot to a smartphone if you performed any one of the operations below after recording the snapshot.
Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send to phone) You can select one more snapshot and/or movie file in camera memory and send it to a smartphone. You can select up to 100 files, totaling no more than 500MB for a single send. After sending an image to a smartphone, you can then upload it to a social networking service. 1. On the camera, touch “ 2. Touch “ 3. Touch the “ 4. Touch “ 5. Touch the images of the files you want to send to the smartphone.
NOTE • You can specify the size of the snapshots sent to the smartphone using “Resize before send” (page 87). • You can use the smartphone apps below to view snapshots after sending them.
Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone) You can use this function to enable up to eight smartphones and/or computers to access snapshots and movies in camera memory for viewing and download. A smartphone does not need to have the EXILIM Remote app installed in order to access camera images using this function. 1. On the camera, touch “ 2. Touch “ 3. Touch the “ 4. Touch “ ” (PLAY) to enter the PLAY mode. ” (Show Icons). ” (Image Send) icon. ” (View on phone).
Printing Professional Print Service You can take a memory card that contains the images you want to print to a professional print service and have them printed. Printing on a Home Printer You can use a printer equipped with a memory card slot to print images directly from a memory card. For details, see the user documentation that comes with your printer. Printing with a Computer After transferring the images to your computer, use commercially available software to print.
. Printing on a Macintosh 1. Use the procedure under “Connecting the Camera to Your Computer and Saving Files” (page 95) to store the image you want to print, and then display the image on your Macintosh screen. 2. Click “File” and then “Print”. 3. Configure print settings and then click “Print”. This will print the selected image.
Using the Camera with a Computer Things you can do using a computer... You can perform the operations described below while the camera is connected to a computer. Save images to a computer and view them there • Save images and view them manually (USB connection) (pages 92, 95). Play back and edit movies • You can play back movies (pages 94, 97). • To edit movies, use commercially available software as required. The procedures you need to perform are different for Windows and the Macintosh.
Viewing and Storing Images on a Computer You can connect the camera to your computer in order to view and store images (snapshot and movie files). Never use your computer to modify, delete, move, or rename any image files that are in the camera’s built-in memory or on its memory card. Doing so can cause problems with the camera’s image management data, which will make it impossible to play back images on the camera and can drastically alter remaining memory capacity.
4. Double-click “Removable Disk”. • Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk. 5. Right-click the “DCIM” folder. 6. On the shortcut menu that appears, click “Copy”. 7. Windows 8.1, Windows 8 users: Click “Documents”. Windows 7, Windows Vista users: Click “Start” and then “Documents”. • If you already have a “DCIM” folder in “Documents”, the next step will overwrite it.
Playing Movies To play back a movie, first copy it to your computer and then double-click the movie file. Some operating systems may not be able to play back movies. If this happens, you need to install separately available software. • If you are unable to play back movies, go to the URL below to download QuickTime 7 and install it on your computer. http://www.apple.com/quicktime/ .
Using the Camera with a Macintosh When you want to do this: Operating System Version Required Software: See page: Save images to your Macintosh and view them there manually OS X Installation not required. 95 Save images to your Macintosh automatically/Manage images OS X iPhoto, which comes bundled with some Macintosh products. – Play movies OS X QuickTime 7.
. To connect the camera to your computer and save files 1. Turn off the camera and then use the micro USB cable that comes with the camera to connect it to your Macintosh. [USB] port USB • For details about connecting to the camera and precautions when connecting, see page 22. Micro USB cable (included with camera) 2. Press [p] (Power) to turn on the camera. • When you turn on the camera, check to make sure that the color of its back lamp changes from red to green or amber (page 23).
. To view copied images 1. Double-click the camera’s drive icon. 2. Double-click the “DCIM” folder to open it. 3. Double-click the folder that contains the images you want to view. 4. Double-click the image file you want to view. • For information about file names, see “Memory Folder Structure” on page 99. • An image that was rotated on the camera will be displayed on your Macintosh screen in its original (unrotated) orientation.
Files and Folders The camera creates a file each time you shoot a snapshot, record a movie, or perform any other operation that stores data. Files are grouped by storing them in folders. Each file and folder has its own unique name. • For details about how folders are organized in memory, see “Memory Folder Structure” (page 99). Name and Maximum Number Allowed Example Each folder can contain up to 9999 files named CIMG0001 through CIMG9999. The extension on the file name depends on the file type.
Memory Card Data The camera stores images you shoot in accordance with the Design Rule for Camera File System (DCF). . About DCF The following operations are supported for DCF-compliant images. Note, however, that CASIO makes no performance guarantees concerning these operations. • Transferring this camera’s DCF-compliant images to another manufacturer’s camera and view them. • Printing this camera’s DCF-compliant images on another manufacturer’s printer.
Other Settings (Set Up) This section explains menu items that you can use to configure settings and perform other operations in both the REC mode and PLAY mode. For information about menu operations, see page 55. Adjusting Monitor Screen Brightness (Screen) Procedure MENU * Setup * Screen You can use the following procedure to change the brightness of the monitor screen.
Locking the Screen (Screen Lock) Procedure MENU * Setup * Screen Lock Normally, the arrangement of icons and the images displayed on the camera monitor screen change automatically in accordance with the camera’s orientation. Selecting “On” for the “Screen Lock” setting will lock the screen so its contents do not readjust to match the camera orientation. Resizing Snapshots before Sending Them to a Smartphone (Resize before send) Procedure MENU * Setup * Resize before send See page 87 for details.
Time Stamping Snapshots (Timestamp) Procedure MENU * Setup * Timestamp You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot. • Once date and time information is stamped into a snapshot, it cannot be edited or deleted. Example: July 10, 2016, 1:25 p.m.
Configuring World Time Settings (World Time) Procedure MENU * Setup * World Time Setting a Travel Destination You can use the World Time screen to view the current time in a zone that is different from your Home City when you go on a trip, etc. World Time displays the current time in 162 cities in 32 time zones around the globe. 1. Touch “Destination”. • To change the geographic area and city for the time where you normally use the camera, select “Home”. 2. Touch “City”.
Setting the Camera’s Clock (Adjust) Procedure MENU * Setup * Adjust 1. Touch the value you want to change (year, month, day, hour, minute). 2. Touch “ ” or “ selected value. ” to change the currently • You can specify a date from 2001 to 2049. • Be sure to select your Home City (page 103) before setting the time and date. If you set the time and date while the wrong city is selected for your Home City, the times and dates of all of the World Time cities (page 103) will be wrong.
Specifying the Display Language (Language) Procedure MENU * Setup * Language . Specify the display language you want. 1. On the menu screen, touch “Setup”. 2. Touch “Language”. 3. Drag upwards and downwards until you find the language you want, and then touch to select it. • Camera models sold in certain geographic areas may not support display language selection.
Changing the Camera Password for Wireless LAN Connection (WLAN password) Procedure MENU * Setup * WLAN password Use procedure to change the password you used when establishing a wireless LAN connection between the camera and a smartphone. 1. Touch the password digit you want to change. 2. Touch “ 3. When the password is the way you want, touch “OK”. ” and “ ” to change the currently selected digit.
Formatting Built-in Memory or a Memory Card (Format) Procedure MENU * Setup * Format If a memory card is loaded in the camera, this operation will format the memory card. It will format built-in memory if no memory card is loaded. • The format operation will delete all contents on the memory card or in built-in memory. It cannot be undone. Make sure you do not need any data currently on the card or in built-in memory before you format it.
Appendix Safety Precautions *DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. *WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*DANGER • Failure to observe any of the following precautions creates the risk of battery overheating, fire, and explosion. – Never use or leave the battery near open flame. – Do not expose the battery to heat or fire. – Make sure the battery is oriented correctly when charging it. – Never carry or store the battery together with items that can conduct electricity (necklaces, pencil lead, etc.).
*WARNING . Smoke, abnormal odor, overheating, and other abnormalities $ • Continued use of the camera while it is emitting smoke or strange odor, or while it is overheating creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet.
*WARNING • Never touch the power plug while your hands are wet. Doing so creates the risk of electric shock. • Should the power cord or power plug become damage, contact your retailer or nearest CASIO authorized service center. • Do not use the USB-AC adapter in areas where liquids* might spill on them. Liquids create the risk of fire and electric shock. * Liquids: Water, sports drinks, seawater, animal or pet urine, etc.
*WARNING . Dropping and Rough Treatment - • Continued use of the camera after it is damaged by dropping or other rough treatment creates the risk of fire and electric shock. Immediately perform the following steps whenever any of the above symptoms are present. 1. Turn off the camera. 2. If you are using the USB-AC adapter to power the camera, unplug the power plug from the power outlet. Also, remove the battery from the camera, taking care to protect yourself against burn injury. 3.
*CAUTION . USB-AC Adapter • Misuse of the USB-AC adapter creates the risk of fire and electric shock. Make sure you observe the following precautions. – Never cover the USB-AC adapter or power cord with a quilt, blanket, or other cover while it is in use, and do not use it near a heater. Doing so can interfere with heat radiation and cause the area around them to become hot. – Do not use detergent when cleaning the power cord, the USB-AC adapter, or the USB cable (especially the plugs and jacks).
*CAUTION . Locations To Be Avoided • Never leave the camera in any of the following types of locations. Doing so creates the risk of fire and electric shock. – Areas subject to large amounts of humidity or dust – Food preparation areas or other locations where oil smoke is present – Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed vehicle parked in the sun, or other areas subject to very high temperatures - .
Precautions During Use . Data Error Precautions Your digital camera is manufactured using precision digital components. Any of the following creates the risk of corruption of data in camera memory.
. Lens • Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction. • You may sometimes notice some distortion in certain types of images, such as a slight bend in lines that should be straight. This is due to the characteristics of lenses, and does not indicate malfunction of the camera. . Caring for your camera • Never touch the lens with your fingers.
. Precautions when using the wireless LAN function This product uses wireless data communication which can cause interference with or be subject to interference by other nearby devices. Radio transmission interception Note that the radio waves that are used to send and receive data can be intercepted by third parties. Unauthorized access CASIO COMPUTER CO., LTD.
. Copyrights Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment.
OpenVG 1.1 Reference Implementation Copyright (c) 2007 The Khronos Group Inc.
Power Supply Charging . If the camera’s back lamp starts flashing red... If the back lamp starts flashing red during charging, it means that further charging is not possible for one of the reasons below. Perform the actions described below to correct the problem and then try charging again.
Battery Precautions . Precautions during Use • Operation provided by a battery under cold conditions is always less than operation under normal temperatures. This is due to the characteristics of the battery, not the camera. • Charge the battery in an area where the temperature is within the range of 15°C to 35°C (59°F to 95°F). Outside this temperature range charging can take longer than normal or even fail. • Do not tear or remove the battery outer label.
Using a Memory Card See page 26 for information about supported memory cards and how to load a memory card. . Using a Memory Card • If a memory card starts to behave abnormally during image playback, you can restore normal operation by reformatting it (page 107). However, it is recommended that you always take along multiple memory cards whenever using the camera far away from the home or office.
Reset Initial Default Settings The tables in this section show the initial default settings on menus that appear in the REC mode and PLAY mode when you reset the camera (page 107). • A dash (–) indicates an item whose setting is not reset or an item for which there is no reset setting. IMPORTANT! • Some menu items may not be available, depending on the recording mode being use. .
. Setup Menu Screen Auto World Time – Info Off Adjust – Screen Lock Off Date Style – Language – HDMI Auto WLAN password – Startup Off Format – Reset – Version – Resize before send 3M Sounds Startup: On / Half Shutter: On / Shutter: On / Operation: On / Operation Vol: 3 / Playback Vol: 3 / Posing Vol: 3 Timestamp Off 124 Appendix
When things don’t go right... Troubleshooting Problem Possible Cause and Recommended Action Power Supply Power does not turn on. 1)The battery of new camera is not charged. Charge the battery before using the camera. 2)The camera battery may be dead. Charge the battery (page 18). If the battery goes dead soon after being charged, it means the battery has reached the end of its life and needs to be replaced. Purchase a separately available CASIO NP-150 rechargeable lithium ion battery.
Problem Possible Cause and Recommended Action The subject is out of focus in the recorded image. The image may not be focused properly. When composing the image, make sure the subject is located inside the focus frame. The LED light does not light. 1)If the battery is dead, charge it (page 18). 2)LED light operation is disabled automatically whenever you are shooting with a BEST SHOT scene and HDR Art. Select a different recording mode (page 38). Camera powers down during Selftimer countdown.
Problem Possible Cause and Recommended Action The image is out of focus during movie recording. 1)Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range. 2)The lens may be dirty. Clean the lens (page 116). 3)During High Speed Movie recording, focus is fixed at the position where it was when recording started. To focus an image, half-press the shutter button for Auto Focus before you touch “ ” (Movie) to start recording.
Problem Possible Cause and Recommended Action Wireless LAN I can’t establish a wireless LAN connection. The wireless LAN connection is broken. 1)The camera cannot connect with a smartphone if they are too far apart from each other. 2)The smartphone may be connected with another wireless LAN. Check the smartphone’s Wi-Fi settings and confirm that the camera is selected for wireless LAN connection (page 82).
Problem Possible Cause and Recommended Action The time and date settings configured the first time after purchasing the camera are reset to their factory defaults when I remove the camera’s battery. Load the camera’s battery and reconfigure the time and date settings (page 24). Do not remove the battery from the camera for at least 24 hours after configuring time and date settings. After that, the settings will not be reset if you remove the battery.
Memory Full Memory is full with images you recorded and/or files saved by editing operations. Delete files you no longer need (page 34). Record Error Image compression could not be performed for some reason during image data storage. Shoot the image again. SYSTEM ERROR Your camera system is corrupted. Contact your retailer or a CASIO authorized service center. There are no files. There are no files in built-in memory or on the memory card. This card is not formatted.
Movies Built-in Memory*1 Recording Capacity Maximum Recording Time with microSD Memory Card*2 File Size of 1-minute Movie Continuous Recording Time per Movie*3 14.2 Megabits/ second (30 frames/ second) 26 seconds *4 2 hours 14 minutes 55 seconds 106.5 MB 29 minutes HD 1280x720 (Monaural) 10.9 Megabits/ second 4 GB or (30 frames/ 29 minutes second) 34 seconds 2 hours 56 minutes 25 seconds 81.8 MB 29 minutes HS240 512x384 (No audio) 40.
Specifications File Format Snapshots: JPEG (Exif Version 2.3; DCF 2.0 standard) Movies: MOV format, H.264/AVC standard, IMA-ADPCM (monaural) Recording Media Built-in Memory (Image Storage Area: 49.9MB*) microSD/microSDHC/microSDXC * Built-in memory capacity after formatting Recorded Image Sizes Snapshots: 12M (4000x3000), 3M (2048x1536) Movies: Full HD (1920x1080 30 fps), HD (1280x720 30 fps), HS240 (512x384 240 fps) Effective Pixels 11.1 Megapixels Imaging Element Size: 1/1.
White Balance Auto, Daylight, Overcast, Shade, Daywhite Fluorescent, Daylight Fluorescent, Tungsten, Manual WB Sensitivity (Standard Output Sensitivity) Snapshots: Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 equivalent Movies: Auto LED Light Auto, On, Off Wireless data transfer Standard: IEEE 802.11b/g/n Operation frequency range: 1 to 11ch Encryption: WPA2 Monitor Screen 3.
Approximate Battery Life All of the values provided below represent the approximate amount of time under normal temperature (23°C (73°F)) before the camera turns off. These values are not guaranteed. Low temperatures shorten battery life.
. Rechargeable lithium ion battery (NP-150) Rated Voltage 3.7 V Rated Capacitance 950 mAh Operating Temperature Requirements 0 to 40°C (32 to 104°F) Dimensions 34.2 (W) x 39.8 (H) x 6.9 (D) mm (1.35" (W) x 1.57" (H) x 0.27" (D)) (excluding projections) Weight Approximately 20 g (0.7 oz) . USB-AC adaptor (AD-C54UC) Input Power 100 to 240 V AC, 50/60 Hz, 90 mA Output Power 5.0 V DC, 650 mA Operating Temperature Requirements 5 to 35°C (41 to 95°F) Dimensions 64.6 (W) x 38.4 (H) x 24 (D) mm (2.
CASIO COMPUTER CO., LTD.
