User`s guide
Table Of Contents
- INTRODUCTION
- QUICK START GUIDE
- GETTING READY
- BASIC IMAGE RECORDING
- OTHER RECORDING FUNCTIONS
- Selecting the Focus Mode
- Exposure Compensation (EV Shift)
- Using the Built-in ND Filter
- Adjusting White Balance
- Specifying the Exposure Mode
- Using the BEST SHOT Mode
- Recording a Movie
- Instant Movie Setups (MOVIE BEST SHOT Mode)
- Recording Audio
- Using the Histogram
- REC Mode Camera Settings
- Specifying ISO Sensitivity
- Selecting the Metering Mode
- Using the Filter Function
- Specifying Outline Sharpness
- Specifying Color Saturation
- Specifying Contrast
- Turning the On-screen Grid On and Off
- Turning Image Review On and Off
- Using Icon Help
- Assigning Functions to the [<] and [>] Keys
- Specifying Power On Default Settings
- Resetting the Camera
- Using the Shortcut Menu (EX Menu)
- Installing the Lens Hood and a Lens Filter
- PLAYBACK
- DELETING FILES
- FILE MANAGEMENT
- OTHER SETTINGS
- USING A MEMORY CARD
- PRINTING IMAGES
- VIEWING IMAGES ON A COMPUTER
- USING THE CAMERA WITH A COMPUTER
- APPENDIX
GETTING READY
49
■ Rapid Charger Precautions
• Never plug the rapid charger into an outlet whose voltage
rating is different from that marked on the rapid charger.
Doing so creates the risk of fire, malfunction, and electric
shock.
• Never plug in or unplug the rapid charger while your
hands are wet. Doing so creates the risk of electric shock.
• Do not plug the rapid charger into an outlet or extension
cord that is shared by other devices. Doing so creates the
risk of fire, malfunction, and electric shock.
• The rapid charger becomes slightly warm during
charging. This is normal and does not indicate
malfunction.
• Unplug the rapid charger from the power outlet whenever
you are not using it.
• Never use the rapid charger with a voltage converter.
Doing so can damage it. The rapid charger can be used
where the power supply is in the range of 100V to 240V
AC.
Using AC Power
You need to purchase the optionally available AC adaptor
(AD-C40) in order to be able to power the camera using AC
power.
1.
Connect the AC power cord to the AC
adaptor.
2.
Open the camera’s terminal panel cover and
connect the AC adaptor to the port marked
[DC IN 4.5V].