User`s guide

VIEWING IMAGES ON A COMPUTER
187
• Take care when connecting the USB cable to the
camera or your computer. USB ports and cable plugs
are shaped for proper positioning.
• Plug the USB cable plugs into the ports securely, as
far as they will go. Proper operation is not possible if
connections are not correct.
10. Turn on the camera.
• If your computer is running Windows 98, 98SE, Me,
or 2000, it will automatically recognize the memory
card loaded in the camera or the camera’s memory.
• If your computer is running Windows XP, the “Found
New Hardware Wizard” dialog box will appear. Select
“Install the software automatically (Recommended)”,
and then click [Next]. The “Casio Digital Camera C has
not passed Windows Logo testing to verify its
compatibility with Windows XP.” message will appear
during installation. CASIO has verified compatibility, so
click [Continue Anyway] to proceed with installation.
• If your computer is running Windows XP-SP2, the
“Found New Hardware Wizard” dialog box will appear.
Select “No, not this time”, and then click [Next]. Select
“Install the software automatically (Recommended)”
and then click [Next]. The “Casio Digital Camera C has
not passed Windows Logo testing to verify its
compatibility with Windows XP.” message will appear
during installation. CASIO has verified compatibility, so
click [Continue Anyway] to proceed with installation.
• This will cause your computer to create a hardware
profile for camera’s built-in memory or the memory
card loaded in the camera. You do not need to install
the USB driver every time. After you install it once,
your computer will recognize the camera’s built-in
memory or its memory card when you connect the
camera using the USB cable.
• This will cause the camera’s operation lamp to light
green.
• At this point, some operating systems will display a
“Removable Disk” dialog box. If your operating
system does, close the dialog box.
Operation lamp
C