User`s guide

USING A MEMORY CARD
171
To copy all the files in built-in memory to
a memory card
1. Load the memory card into the camera.
2. Turn on the camera. Next, enter the PLAY
mode and press [MENU].
3. Select the “PLAY” tab,
select “Copy”, and
then press [].
4. Use [] and [] to select “Built-in Card”,
and then press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• After the copy operation is complete, the monitor
screen shows the last file in the folder.
To copy a specific file from a memory
card to built-in memory
1. Perform steps 1 through 3 of the procedure
under “To copy all the files in built-in memory
to a memory card”.
2. Use [] and [] to select “Card Built-in”,
and then press [SET].
3. Use [] and [] to select the file you want to
copy.
4. Use [] and [] to select “Copy”, and then
press [SET].
• This starts the copy operation and displays the
message “Busy.... Please wait...”.
• The file reappears on the monitor screen after the
copy operation is complete.
• Repeat steps 3 through 4 to copy other images, if
you want.