User`s guide
Table Of Contents
- INTRODUCTION
- QUICK START GUIDE
- GETTING READY
- BASIC IMAGE RECORDING
- OTHER RECORDING FUNCTIONS
- Selecting the Focus Mode
- Exposure Compensation (EV Shift)
- Using the Built-in ND Filter
- Adjusting White Balance
- Specifying the Exposure Mode
- Using the BEST SHOT Mode
- Recording a Movie
- Instant Movie Setups (MOVIE BEST SHOT Mode)
- Recording Audio
- Using the Histogram
- REC Mode Camera Settings
- Specifying ISO Sensitivity
- Selecting the Metering Mode
- Using the Filter Function
- Specifying Outline Sharpness
- Specifying Color Saturation
- Specifying Contrast
- Turning the On-screen Grid On and Off
- Turning Image Review On and Off
- Using Icon Help
- Assigning Functions to the [<] and [>] Keys
- Specifying Power On Default Settings
- Resetting the Camera
- Using the Shortcut Menu (EX Menu)
- Installing the Lens Hood and a Lens Filter
- PLAYBACK
- DELETING FILES
- FILE MANAGEMENT
- OTHER SETTINGS
- USING A MEMORY CARD
- PRINTING IMAGES
- VIEWING IMAGES ON A COMPUTER
- USING THE CAMERA WITH A COMPUTER
- APPENDIX
OTHER SETTINGS
164
Changing the USB Port Protocol
You can use the procedure below to change the
communication protocol of the camera’s USB port when
connecting to a computer, printer, or other external device.
Select the protocol that suits the device to which you are
connecting.
1.
Press [MENU].
2.
Select the “Set Up” tab, select “USB”, and
then press [].
3.
Use [] and [] to select the setting you
want, and then press [SET].
Select this setting:
Mass Storage
PTP (PictBridge)*
When connecting to this type of
device:
Computer
PictBridge-compatible printer
(page 177)
* “PTP” stands for “Picture Transfer Protocol”.
• Mass Storage causes the camera to see the
computer as an external storage device. Use this
setting for normal transfer of images from the camera
to a computer (using the bundled Photo Loader
application).
• PTP (PictBridge) simplifies the transfer of image data
to the connected device.