User Manual
Table Of Contents
- Accessories
- Read this first!
- Using This Camera for the First Time
- Using This Camera with Another (Separately Available) Camera
- Contents
- General Guide
- Quick Start Basics
- Shooting with the Camera
- Controlling the Camera with a Smartphone
- Controlling Your Camera with a Smartphone
- Getting Ready to Establish a Connection between a Smartphone and Your Camera
- Using a Smartphone as a Camera Remote Controller (Shoot with phone)
- Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on phone)
- Having Images Shot with the Camera Sent to a Smartphone Automatically (Auto Send)
- Unpairing the Camera from a Smartphone (Unpair)
- Operating the Camera with the Controller of Another (Separately Available) CASIO Camera
- Printing
- Using the Camera with a Computer
- Appendix
21
Quick Start Basics
Before using a memory card with this camera, establish a connection between the
camera and a smartphone and use the EXILIM Connect app (page 26) to format it.
1. On the smartphone, go to the EXILIM Connect TOP screen and tap
“¥”.
2. On the smartphone, tap “Setting up the camera”.
3. On the smartphone, tap “Format”.
4. Tap “OK” twice.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use EXILIM Connect or a controller that came with another (separately
available) CASIO camera to format the memory card. Formatting a memory card
on a computer can result on non-compliance with the SD standard, extremely slow
processing speed, and other compatibility problems.
• For details about the formatting operation using the controller, refer to the user
documentation that comes with the other camera.
To format (initialize) a new memory card