Owner's Manual

70
Using BEST SHOT
5. Release the shutter button.
Continuous Shutter shooting will stop and the resulting composite image will
appear on the monitor screen.
• The above procedure shoots multiple images and combines them
automatically into a final image. Do not move the camera until shooting is
complete.
• You can configure the CS fps and Prerecord CS time settings the same way as
you configure the High-speed CS setting. Note, however, unlike High-speed
CS, the maximum CS fps setting is 30.
• When recording, keep the shutter button depressed long enough to record at
least six consecutive shutter images.
NOTE
• The following mode dial settings are ignored when shooting with this BEST SHOT
scene: t (Single Shot), × (High-speed CS), ª (Flash CS).
• Shooting with this BEST SHOT scene makes the shooting range narrower than
normal.
• Shooting with “Multi-motion Image” assumes that the subject is moving and
changing positions. Trying to use it to shoot a subject that is moving while
maintaining the same location (such as a golf swing, a baseball swing, etc.) will
cause an error message to appear on the monitor screen and failure of image
recording, or will produce an image in which the shots of the subject are arranged
incorrectly.
• Multi-motion will not operate correctly if you shake or move the camera along with
the movement of the subject.
• If an error message appears on the monitor screen, either secure the camera so it
does not move or shoot against a different type of background.
• Choose a shooting angle so the colors, shapes, and patterns of the moving subject
and the background are as different as possible.
• Avoid a shooting angle where the background is monotone or mono-pattern (such
as a clear blue sky).
• The camera may not be able to compose the final image if the intervals between
movements are so narrow the subject shots overlap. If this happens, increase the
interval by using the control panel to select a slower “High-speed CS fps” setting
(page 51).
B