User`s guide

SHOOTING A SNAPSHOT

Perform the following steps to select the flash mode you want to

use.

Approximate Flash Range (ISO Sensitivity: Auto)

• The flash range changes in accordance with optical zoom.

1. In the REC mode, press [T] ( ) once.

2. Use [W] and [X] to select the flash setting you

want and then press [SET].

This causes an indicator identifying the selected flash mode

to appear on the monitor screen.

3. Press the shutter button to shoot.

Using Flash

Flash Setting Description

Auto Flash Flash fires automatically in accordance with

exposure (amount of light and brightness)

conditions.

• Initial factory default setting.

Flash Off Flash does not fire.

Flash On Flash always fires.

• This setting can be used to brighten a

subject that normally comes out dark due

to daylight or backlight (daylight synchro

flash).

Soft Flash Always use soft flash, regardless of

exposure conditions.

• Use this setting when you want to

suppress the flash to avoid reflection, etc.

Red Eye

Reduction

Flash fires automatically in accordance

same conditions as Auto Flash. This setting

can be used to reduce the red eye effect that

occurs in images of people shot with flash.

Wide Angle: 0.15 m to 3.9 m (0.5' to 12.8')

Telephoto : 0.4 m to 2.0 m (1.3' to 6.6')

[T] ( )

Flash mode