User`s guide

GETTING READY

If the [CHARGE] lamp flashes red

This indicates that the camera or battery is faulty, or that the

battery is loaded in the camera incorrectly.

Remove the battery from the camera and check if its contacts

are dirty. If they are, wipe them off with a dry cloth and then

reload the battery into the camera. After confirming that the AC

adaptor is plugged into the power outlet and the USB cradle, set

the camera on the cradle again.

IMPORTANT!

• Use only the bundled USB cradle or the separately

available special charger unit (BC-11L) to charge the

special rechargeable lithium ion battery (NP-20). The

battery cannot be charged using any other type of charger

device. Attempting to use a different charger can result in

unexpected accident.

• This camera is designed for use only with the USB cradle

that comes with it. Never try to use any other type of cradle.

• Use only the AC adaptor that comes bundled with the

camera. Never use any other type of AC adaptor. Use of

the separately available AD-C30, AD-C40, AD-C620, or

AD-C630 is not supported.

If an error still continues to occur after you perform the above

steps, it could mean that the battery is faulty. Contact your

nearest CASIO authorized service center.