User Manual

70
Snapshot Tutorial
10. Press the shutter button the rest of the way and hold it down.
Full pressing the shutter button will record the images in the pre-record buffer
followed by real-time recorded images. Shooting of images will continue as long
as you depress the shutter or until the maximum number of images specified by
“Maximum CS Shots” is reached.
NOTE
• After shooting, you will not be able to shoot again until the camera finishes
processing of the images.
• The settings below can be configured while shooting with this function.
Shutter Speed: Auto, 1/60 to 1/20000 seconds
ISO Sensitivity: Auto, ISO80 to ISO12800
(The actual available setting range depends on the shutter speed and aperture.)
High Speed CS fps: 15 to 60
Maximum CS Shots: 10 to 60
Pre-record CS Shots: 0 to 55
• Images shot with this function are 16:9 (3840
x
2160) in size. Snapshot image
quality is “Normal”.
• The functions below cannot be used with this function.
Single SR Zoom, Make-up, Remote Capture, EX Finder, Review, Front Shutter “AF
less” and “CS”, Motion Shutter, movie recording, Flash, Timestamp
• You cannot use Triple Self-timer with this function. However, when the “Pre-record
CS Shots” setting is something other than 0, Self-timer also cannot be used.
• The current High Speed CS fps, Maximum CS Shots, and Pre-record CS Shots
settings are retained when the camera is turned off.
• Selecting a different BEST SHOT scene or turning off the camera causes the
following settings to be reset to their initial defaults: ISO sensitivity, aperture,
shutter speed.
• The CS Multi Print PLAY mode function cannot be used with group files recorded
with this function.
• Custom Shot setup registration is not supported for images shot with this function.