User Manual

69
Snapshot Tutorial
9. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option and then press [SET].
10. Use [8] and [2] to select the maximum number of shots and then
press [SET].
11. Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by “High Speed CS fps” is reached.
High Speed CS lets you shoot a burst of up to 60 images at a speed of up to 60
frames per second (fps). Images shot with this function are 8M in size, and have an
aspect ratio to 16:9. Aperture and shutter speed settings can be configured manually.
1. In the BEST SHOT Mode, select “60 fps High Speed CS” (page 93).
2. Press [SET].
3. Use [8] and [2] to select the (High Speed CS fps) Control Panel
option and then press [SET].
4. Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
5. Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option and then press [SET].
6. Use [8] and [2] to select the maximum number of shots and then
press [6].
7. Use [8] and [2] to select the (Pre-record CS Shots) Control Panel
option and then press [SET].
8. Use [8] and [2] to select the number of Prerecord (Still) images and
then press [SET].
If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
9. Half-press the shutter button.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
• The camera will not emit shutter sounds as it pre-records images.
• Releasing the half-pressed shutter button will cause the contents of the pre-
record buffer to be deleted.
Using High Speed CS (60 fps)