User Manual

24
Quick Start Basics
IMPORTANT!
A battery that has not been used for a long time and/or ambient temperature can
cause charging to take longer than normal. These conditions may also cause the
back lamp to flash red. If this happens, refer to page 216.
Make sure that you insert the cable connector into the [USB] port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Pressing [ON/OFF] (Power) while the USB-AC adaptor is
connected to the camera will turn on the camera with
power being supplied by the battery. Because of this,
charging will stop.
The USB-AC adaptor will become warm during charging.
This is normal and does not indicate malfunction.
The shape of the power plug depends on each country or geographic area.
Back Lamp Operation
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature,
USB-AC adaptor problem, or battery
problem (page 216)
Off Charging complete
Back lamp