User Manual

122
Advanced Settings (REC MENU)
NOTE
• Auto Focus is disabled when “MF” (Manual Focus) is selected for the focus mode
(page 49), even if you select an AF area.
• Selecting “O Tracking” can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
• With some BEST SHOT scenes, there are restrictions on the use of AF area
settings. Because of this, you may not be able to use certain settings or you may
not be able to specify any AF Area setting.
• While Face Detection (page 123) is turned on, regardless of the current AF Area
setting, “U Spot” (center) focusing will be used automatically whenever a face
cannot be detected for some reason.
• When the AF area is “I Multi”, functions assigned to [8] and [2] by the Key
Customize “U/D Key” setting (page 117) are not used.
• While the AF area setting is “I Multi”, [8] (DISP) and [2] ( ) perform the
functions described above, and do not perform their normal functions (monitor
screen content selection and flash setting selection).
“U Spot” or “O Tracking”
Focus frame
“š Intelligent”
Focus frame
“I Multi”
Focus frame