User manual

Configuring Timer Settings
1.
Y
On the Home Screen, tap the “CASIO
WATCH+”
icon.
2.
X
Hold down (C) for about two seconds.
●
The
second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
Setting the Alarm
1.
Y
On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
X
Hold down (C) for about two seconds.
●
The
second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use CASIO WATCH+ to
adjust them.
1.
Y
On the Home Screen, tap the “CASIO
WATCH+
” icon.
2.
X
Hold down (C) for about two seconds.
●
The
second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced
to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
2.
X
Hold down (A) for about two seconds.
This will cause the watch to enter the
Calendar Mode.
3.
X
Hold down (D) for about 1.5 seconds
until the second hand points to [R]
.
The second hand will move to
e
when a
connection is established between the
watch and phone, and then the phone’s
ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
4.
X
Press any button to stop the tone.
●
You
can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.
Configuring Watch Settings
You can use CASIO WATCH+ to specify the
amount
of time until a Bluetooth connection is
automatically terminated, to enable or disable
the watch operation tone, and to configure
other settings.
1.
Y
On the Home Screen, tap the “CASIO
WATCH+”
icon.
2.
X
Hold down (C) for about two seconds.
●
The
second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5560
8