User manual

Low Battery Power
The second hand jumps at two-second
intervals.
30
Second hand
Dead Battery
All hands and the day indicator are stopped.
1
●
Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Required Charging Time for 1-day Use
Light Intensity Approximate Charging Time
High
p
Low
A
8 minutes
B
30 minutes
C
48 minutes
D
8 hours
Time Required to Achieve Next Charge
Level
Light Intensity
Approximate Charging Time
Charge Level
1
Charge Level
2
High
p
Low
A
2 hours 22 hours
B
5 hours 82 hours
C
8 hours 132 hours
D
90 hours -
Light Intensity
A
Sunny day, outdoors (50,000 lux)
B
Sunny day, near a window (10,000 lux)
C
Overcast day, near a window (5,000 lux)
D
Indoor fluorescent lighting (500 lux)
Charge Level 1 :
Time from dead battery until hand movement
starts
Charge Level 2 :
Time from hand movement start until a full
charge
Note
●
The charge level is indicated by the
second hand.
l
Checking the Charge Level
●
Actual charging time depends on the
local charging environment.
●
Power Saving
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the
watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, all hands will stop at 12 o’clock and the
watch will enter Level 2 power saving.
Level 1 :
Second hand stops to save power.
Level 2 :
The following operations are stopped to save
power:
all hand movement (excluding the day
indicator), Bluetooth connection, and alarm
alerts.
Recovering from Power Saving Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between
the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Note
●
This function is available only while
CASIO WATCH+ is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO “CASIO
WATCH+” app and install it on
your phone.
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move
the phone to be paired with close to
(within one meter of) the watch.
2.
Y
On the Home Screen, tap the “CASIO
WATCH+” icon.
3.
Y
Perform the operation shown on the
screen of the phone to be paired with.
●
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
When pairing starts, the second hand
will
move to 12 o’clock. When pairing is
complete, the second hand will move to
e
.
Auto Time Adjustment
You can configure watch settings to connect
with a phone at preset times each day and
adjust its time settings in accordance with
information obtained from an online time
server.
●
Using Auto Adjust
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave
your watch in the Calendar Mode, it will
perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Operation Guide 5560
5