User manual

Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive
or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
On the Home Screen, tap the “CASIO
WATCH+”
icon.
2.
X
Hold down (C) for about two seconds.
●
The
second hand will move to [R]. Keep
(C) depressed until the second hand
starts moving again and completes one
full revolution, stopping again at [R].
●
The second hand will move from [R] to
e
when a connection is established
between the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
2.
Y
On the Home Screen, tap the “CASIO
WATCH+”
icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them, use
the procedure below to delete pairing
information from the watch and then
perform the pairing operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (D) for about five
seconds.
This causes the second hand to
perform
one revolution and deletes the
pairing information.
C
X
Push the crown back in.
After Purchasing Another Phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
1.
Move
the phone to be paired with close to
(within one meter of) the watch.
2.
Y
On the Home Screen, tap the “CASIO
WATCH+
” icon.
3.
Y
Perform the operation shown on the
screen of the phone to be paired with.
●
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
When pairing starts, the second hand
will point to
[R]. When pairing is
complete, the second hand will move to
e
.
Note
●
If your previous phone is near the
watch while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible
to pair with the new phone.
If this happens, delete the previous
pairing information from the watch.
Also, unregister the watch from the
CASIO WATCH+ app of the phone you
will no longer connect with.
l
Unpairing
Operation Guide 5560
10