User manual

Using Watch Operations to
Adjust the Time and Day
Settings
1. Pull out the crown to the second click.
This causes the second hand to move to
12 o’clock, and enables the hour and
minute setting operation.
30
Crown
Second hand
●
Each press of (A) cycles through
available setting items in the sequence
shown below.
Day
Month
1 year
10 years
Hours, minutes
2. Rotate the crown to change the hour and
minute settings.
●
While checking if the 24-hour hand is
indicating a.m. (right side) or p.m. (left
side), set the desired time.
3. Press (A).
This enables the year ten’s digit setting
operation.
4. Rotate the crown to move the second
hand to the desired setting for the year
ten’s digit.
80 40
90
30
20
50
70
10
60
00
Year (10’s digit)
5. Press (A).
This enables the year one’s digit setting
operation.
6. Rotate the crown to move the second
hand to the desired setting for the year
one’s digit.
84
9
3
2
5
7
1
6
0
Year (one’s digit)
7. Press (A).
This enables the month setting operation.
8. Rotate the crown to change the month.
10
11
12
84
9
3
2
5
7
1
6
Month
9. Press (A).
This causes the second hand to move to
12 o’clock, and enables the day setting
operation. The function hand will move
slightly at this time.
●
The function hand will move repeatedly
while the day setting is being changed.
l
Hand and Day Indicator Movement
10. Rotate the crown to change the day.
30
Day
11. On a time signal at the top of a minute,
push the crown back in.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Note
●
This function is available only while
EDIFICE Connected is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the required app on your
phone.
In Google Play or the App Store, search for the
CASIO “EDIFICE Connected” app and install
it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
Operation Guide 5639
6