User manual

Schedule timer
Q1
How do I disable the schedule timer
notification sound?
Use the procedure below to disable the
schedule timer notification sound.
l
Enabling or Disabling the Schedule Timer
Notification Sound
Q2
The schedule timer notification
sound does not sound.
Is schedule timer notification sound turned
on? If it isn’t, turn it on so it will sound.
l
Enabling or Disabling the Schedule Timer
Notification Sound
Q3
The schedule timer function does not
work.
The schedule timer becomes disabled if you
manually adjust the watch’s time setting.
Before using the Schedule Timer, connect the
watch with your phone and sync their time
settings.
l
Connecting with a Phone
Q4
[--:-- END] remains on the display
and I cannot use the schedule timer
even though settings are configured
to allow use of the schedule timer.
Have you adjusted time settings
manually?
The schedule timer becomes disabled if
you manually adjust the watch’s time
setting. Before using the Schedule Timer,
connect the watch with your phone and
sync their time settings.
l
Connecting with a Phone
Is the scheduled event within 24 hours
from your current time?
Up to five scheduled events, scheduled
within 24 hours from your current time are
sent from your phone to the watch.
Alarm and Hourly Time
Signal
Q1
An alarm does not sound.
The alarm’s settings may not be configured.
Configure the alarm settings.
l
Configuring Alarm Settings
Q2
The hourly time signal does not
sound.
The hourly time signal may be disabled.
Enable the hourly time signal.
l
Enabling the Hourly Time Signal
Battery
Q1
is flashing on the digital
display.
flashes on the display when battery
voltage goes low.
Have the battery replaced.
Request battery replacement from a CASIO
service center or your original retailer.
l
Battery Replacement
Q2
[R] is flashing on the digital display.
[R] may appear on the display when the
watch’s battery power is low, or if you use the
light or other function a number of times during
a short period, which momentarily causes the
battery level to go low. If this happens, all
watch functions, except for timekeeping, are
disabled.
If [R] remains on the display or if it keeps
appearing, it may indicate that the battery
needs to be replaced.
Request battery replacement from a CASIO
service center or your original retailer.
Hand Movement and
Indications
Q1
I don’t know what mode the watch is
in.
To return to the Timekeeping Mode, hold
down (C) for at least two seconds.
l
Navigating Between Modes
Q2
All hands are stopped and buttons do
not work.
The battery is dead. Request battery
replacement from a CASIO service center or
your original retailer.
l
Battery Replacement
Q3
The hands suddenly start moving at
high speed.
This is due to the reason (or one of the
reasons) below, and does not indicate
malfunction. Simply wait until normal hand
movement resumes.
●
Watch is connected with a phone to adjust
its time setting.
l
Auto Time Adjustment
Q4
Why is the current time indicated by
the watch is off by a certain amount
of time (nine hours, three hours and
15 minutes, etc.)?
The city setting is not correct. Select the
correct setting.
l
Setting a Home City
Watch Operation Guide 5686
28