User manual

Table Of Contents
World Time
World Time lets you look up the current time
in any one of 38 cities around the globe, and
UTC (Coordinated Universal Time).
Note
World Time cities that can be selected
only by using EDIFICE Connected
cannot be selected using watch
operations.
l
Configuring World Time Settings
Checking World Time
1. Enter the World Time Mode.
l
Navigating Between Modes
After the currently selected World Time
City name appears, the watch will display
the current time in that city.
To display the World Time City name
while in the World Time Mode, press
(B).
World Time City
World Time
World Time City Setting
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also
configure a summer time setting.
Note
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, the [AUTO] setting lets you use
the watch without switching between
summer time and standard time.
1. Enter the World Time Mode.
l
Navigating Between Modes
2. Use (D) to display the city you want.
3. To change the summer time setting, hold
down (B) for at least two seconds.
Release the button when [AUTO] starts to
flash.
4. Use (D) to select a summer time setting.
Each press of (D) cycles through available
settings in the sequence shown below.
[AUTO]
The watch switches between standard
time and summer time automatically.
[OFF]
The watch always indicates standard
time.
[ON]
The watch always indicates summer
time.
5. Press (B) to exit the setting screen.
Note
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
If you select a World Time City with
EDIFICE Connected and then change
to a different city with a watch
operation, the EDIFICE Connected
city information will be deleted from the
watch.
l
Configuring World Time Settings
Swapping Your Home Time
and World Time
In the World Time mode, hold down (A) for at
least two seconds to swap your Home City
time with your World Time.
World Time
World Time
Home Time
Home Time
After swappingBefore swapping
Operation Guide 5638
13