User`s guide

E-40

Product Specifications (PJ Camera Stand)

* For PJ Camera specifications, see the PJ Camera User’s Guide on the CASIO CD-ROM.

Power Requirements: 100V to 240V AC, 50/60Hz

Rated Voltage: 5.0V

Power Consumption: 5.2W

Connection Terminal: USB (1.1) × 1

Approximate Dimensions: 168(W) × 43(H) × 285(D) mm (excluding projections)

(6.6 × 1.7 × 11.2 inches)

During Use: 327(W) × 391(H) × 264(D) mm

(12.9 × 15.4 × 10.4 inches)

Approximate Weight: 1.6kg (3.53 lbs)

Minimum Computer System Requirements

The following are the minimum system requirements for a computer to run PJ Camera Software.

Operating System

Microsoft

Windows

XP, 2000 Professional, or Me

Computer

IBM PC/AT or compatible that conforms to the following conditions.

• Windows XP, 2000 Professional, or Me pre-installed

• 800 MHz Pentium

or higher CPU

• USB port

Memory

At least 64MB

Hard Disk

At least 15MB available for software installation, and at least 500MB additional disk space for

running the software

Display

Color monitor (16-bit color or greater, Full Color recommended) with a resolution of 1024 × 768

dots or 800 × 600 dots, that supports connection to your computer and operation under

Windows XP, 2000 Professional, or Me.

Pointing Device

Mouse or compatible device that supports operation under Windows XP, 2000 Professional, or Me

Keyboard

CD-ROM Drive

* In addition to the above, the system should conform to the recommendations of the operating

system being used.

* Normal operation may not be possible under certain hardware configurations.

* Operation is not supported on a computer running Windows 3.1, 95, 98, 98SE, or NT, on a

Macintosh running a MacOS.

* Operation on a computer upgraded to Windows XP, 2000 Professional, or Me from another

operating system is not supported.

Minimum Computer System Requirements